Filter
Top Products
16 C2636M-B (4/07)
To connect the Expansion Unit to the DX8100 DVR:
1. Do one of the following:
•
Desktop mounting:
Set the Expansion to the side or on top of the DX8100.
•
Rack mounting:
Attach the rack mount kit and install the Expansion Unit in the rack enclosure directly above
the DX8100.
2. Connect the 50-pin Expansion cable end (partially shown in Figure 15) to the Expansion Unit connector, and then
connect the 50-pin Expansion cable end to DX8100 I/O card.
3. Plug the power cord back into the DX8100 and then into the wall.
Figure 15.
Interfacing the Expansion Unit and DX8100