Filter
Top Products
2 C2471M-A (7/07)
The IS-SC is a 4-foot service cable for use with the IS90, IS110, and IS150 Series Camclosure
®
mini domes
or the CC3610UH, CC3710UH, CC3770UH, and CC3710S Series cameras. The cable allows a video monitor
to be connected to a mini dome or camera so that the picture can be adjusted at the location of the mini
dome or camera.
To connect the cable:
1. Plug the male connector on the service cable into the female connector located on the mini dome or
camera. For the location of connector on the mini dome or camera, refer to the manual supplied with
the equipment.
2. Connect the BNC connector on the service cable to any standard BNC (video input) connector on a
monitor.
NOTE:
For the CC3610UH, CC3710UH, CC3770UH, and CC3710S Series cameras, only the monitor that is
connected to the service cable will display video. All other monitor viewing will be interrupted.
3. To adjust the video, refer to the manual that is supplied with the mini dome or camera.
Figure 1.
IS-SC Service Cable
SERVICE
CABLE MALE
CONNECTOR
BNC CONNECTOR
The materials used in the manufacture of this document and its components are compliant to the
requirements of Directive 2002/95/EC.