Filter
Top Products
2 C2228M-C (7/07)
To attach the PMCL-V200 to a monitor mount:
1. Use the 10-32 x 3/4-inch flat head Phillips screws, #10 split lock washers, and hex nuts (supplied) to secure the adapter plate to the monitor mount.
Refer to Figure 1.
Figure 1.
Attaching the PMCL-V200 Monitor Mount Adapter to a Monitor Mount
2. Attach the monitor mount to the monitor. Refer to Figure 2 and do one of the following:
•
31-inch monitor or smaller:
Align the monitor to the correct hole pattern on the mounting plate. Use the M4 x 10 mm screws and split lock
washers (supplied) to secure the monitor to the mounting plate.
or
•
Monitors larger than 31-inches:
Align the monitor to the outside hole pattern of the monitor plate. Use the M6 x 12 mm screws and flat
washers (supplied) to secure the monitor to the mounting plate.
Figure 2.
Attaching the PMCL-V200 Adapter and Monitor Mount to a Monitor
3. Refer to the manual shipped with the monitor mount for further instructions.
HEX NUT
#10 SPLIT
LOCK WASHER
10-32X3/4
PHILLIPS SCREW
ADAPTER PLATE PMCL-WM1A
MONITOR MOUNT
#8 SPLIT
LOCK WASHER
M4X10MM
PHILLIPS SCREW
PMCL-V200
ADAPTER PLATE
PMCL-WM1A
MONITOR MOUNT