Filter
Top Products
4 C2902M (10/02)
IMPORTANT SAFEGUARDS AND WARNINGS
Before installing your equipment, please read the following important safeguards as outlined by Underwriters Laboratories Inc.
Read Instructions
All the safety and operating instructions should be read before the appliance is operated.
Retain Instructions
The safety and operating instructions should be retained for future reference.
Heed Warnings
All warnings on the appliance and in the operating instructions should be followed.
Follow Instructions
All operating and use instructions should be followed.
Cleaning
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Attachments
Do not use attachments not recommended by Pelco as they may cause hazards.
Water and Moisture
Do not use this CCTV product near water–for example, near a kitchen sink, wash bowl, bath tub, sprinkler, in a wet basement or
near a swimming pool, and the like unless it is specifically marked “for use in wet locations.”
Accessories
Do not place this CCTV product on an unstable cart, stand, tripod, bracket, or table. The CCTV product may fall, causing serious
injury to a child or adult and serious damage to the appliance. Use only with a cart, stand, tripod, bracket or table recom-
mended by Pelco or supplied by Pelco with the product. When mounting the appliance, follow Pelco’s installation instructions,
and use only mounting accessories recommended by Pelco.
Cart & Stand
An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause
the appliance and cart combination to overturn.
Ventilation
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the CCTV product and to
protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing
the CCTV product on furniture, carpet, or similar surfaces. The CCTV product should never be placed near or over radiators or
heat registers. This CCTV product should not be placed in a built-in installation, such as a book case or rack, unless proper
ventilation is provided or Pelco’s installation instructions are adhered to.
Power Sources
This CCTV product should only be operated from the type of power source indicated on the marketing label. If you are not sure
of the type of power supply to your installation location, consult your local electrical building official or power company. Refer
to the operating instructions for appliances intended to operate from battery or other power sources.
Grounding
This CCTV product is equipped with a grounding-type plug. This plug will only fit into a grounding-type power outlet. This is a
safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do
not defeat the grounding-type plug since it is provided to ensure your safety.
Power-Cord Protection
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
Overloading
Do no overload wall outlets and extension cords as this can result in a risk of fire or electric shock.