Filter
Top Products
Pelco Manual C651M (7/99) 51
MECHANICAL
Heads
Video: 4 rotary single crystal heads
Audio/Control: 1 stationary head
Erase: 1 full-track head
Motors: 3 motors-drum/capstan direct drive system
Video Input: 1.0 Vp-p, 75 ohms, BNC plug
Audio Input: -8 dBs, 50k ohms, RCA plug
Microphone Input: -67 dBs, 600 ohms, mini mic jack
Video Output: 1.0 Vp-p, 75 ohms, BNC plug
Audio Output: -6 dBs, 1k ohms, RCA plug
Connectors:
SET Input: Screw terminal for starting alarm recording
RST Input: Screw terminal for finishing alarm recording or for
adjusting on-screen clock
REC Input: Screw terminal for starting/finishing recording or for
series recording
GND: Screw terminal for ground
ALM Output: Screw terminal for output while alarm recording is
under way
CLK Output: Screw terminal to command camera switching
MODE Output: Screw terminal for indication of VCR selected mode
CALL Output: Screw terminal for external warning device or for
series recording
REMOTE Jack Jack for connecting the remote control unit
GENERAL
Operating Temperature: 41°F-104°F (5°C to 40°C)
Relative Humidity: Maximum 80%
Dimensions: 3.7”H x 16.7”W x 12.4”D (JOG dial included)
(9.3 x 42.5 x 31.5 cm)
Weight: 10 lb (4.5 kg)
(Design and specifications are subject to change without notice.)