Filter
Top Products
Perle SMI Media Converter Guide
14
2.
Type set server internet <IPv4 address>netmask
<mask>[Enter]
Example:
set server internet 196.12.10.9 netmask
255.255.255.0[Enter]
1.
Type save [Enter]
2.
When prompted “Save config to flash ROM y/n” [Enter]
3.
Type reboot [Enter]
4.
When prompted “Confirm reboot unit y/n [Enter]
5.
When the Management module reboots, the IP address
you entered will be active. You can now use your
favourite web browser to configure the module. Simply
enter the IP address in the web browsers address field
and press [Enter].
6.
You can also use Telnet, SSH or SNMP to configure the
Management module.
Resetting the MCR-MGT Management Module To
Factory Default Settings
If it becomes necessary to return the Management module
to the factory default settings, press and hold the “RESET”
button on the front of the module for 3 seconds (you can use
a paper clip to do this). This will return the configuration to
the factory default settings and will force the module to
reboot.