Filter
Top Products
Fast Fiber to Fiber Media Converter – Installation Guide 2
Overview
This document contains instructions necessary for the installation
and operation of the Perle Fast Fiber to Fiber Standalone Media
Converters (S-100MM). These products allow dissimilar 100Base-
X fiber interfaces to connect to one another.
These are the fiber to fiber conversion models:
• Multimode to Multimode (MM)
• Multimode to Single Mode ..(SM)
• Multimode to Single Mode Single Strand (SM)
The first fiber port will be MM and the second fiber port can be
either single mode (SM) or multimode (MM) depending on the
model selected. They can operate over different wavelengths and
distances. (See tables below).
Fiber port 1 – MM1
Model Connector Mode
Distance
Wavelength
(TX/RX)
All models SC/ST/LC MM. 2 km/1.2 mi 1310 nm
Fiber port 2 – MM2/SM2
Model Connector Mode
Distance
Wavelength
(TX/RX)
S-100MM-M2xx2 SC/ST/LC MM 2 km/1.2 mi. 1310 nm
S-100MM-S2xx20 SC/ST/LC SM. 20 km/12.4 mi. 1310 nm
S-100MM-S2xx40 SC/ST/LC SM 40 km/24.9 mi. 1310 nm
S-100MM-S2xx80 SC/ST/LC SM 80 km/49.7 mi. 1550 nm
S-100MM-S2xx120 SC/ST/LC SM 120 km/74.6 mi 1550 nm
S-100MM-S1SC20U SC SM 20 km/12.4 mi. 1310/1550 nm
S-100MM-S1SC20D SC SM 20 km/12.4 mi. 1550/1310 nm
S-100MM-S1SC40U SC SM 40 km/24.9 mi. 1310/1550 nm
S-100MM-S1SC40D SC SM 40 km/24.9 mi. 1550/1310 nm
Note: Please refer to Perle’s web site for the most up to date
Installation guides, models and specifications:
http://www.perle.com/