Filter
Top Products
-12- EN
1
Press [MODE] once when
any track is not in playback.
2
Use [K / L] at your desired
track, then press [ENTER].
Up to 99 tracks can be
ordered.
If eight or more tracks are in
a program, use
[SKIP
H
,
G]
to see all
the tracks.
3
Press [PLAY B]
to start the program.
1
Press [MODE] twice when
any track is not in playback.
2
Press [PLAY B] to start
random playback.
1
Press [A-B] at your desired
starting point (A).
2
Press [A-B] at your desired
ending point (B).
Repeat / Random / Programmed Playback
Each time you press [REPEAT], repeat function changes as
example below.
Repeat function is available only during playback.
Repeat function is available only during playback.
You may determine the order in which tracks will
play.
1
Press [REPEAT] during playback.
Repeat Playback
Programmed Playback
Repeat A-B Playback
Random Playback
A-
A-B
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
RANDOM
This function shuffles the playing order of
tracks instead of playback in sequence.
CD-DA
TOTAL 0:00:00
OFF
(repeat off)
CHAPTER
(current chapter repeat)
TITLE
(current title repeat)
OFF
(repeat off)
TRACK
(current track repeat)
ALL
(entire disc repeat)
Hint
• Repeat setting will be cleared when moving to another title,
chapter or track.
• Repeat playback may not function with some discs or during
repeat A-B playback.
• Repeat playback is not available when you play the Video CD
with PBC function.
Hint
• To repeat the current track in the random selections, press
[REPEAT] repeatedly until “
TRACK” appears during playback.
• To repeat the entire random selections, press [REPEAT]
repeatedly until “
ALL” appears during playback.
• During random playback, you cannot go back to the previous
track.
Hint
• Press [CLEAR] at step 2 to erase the most recently entered track.
• To erase all programmed tracks at once, select “ALL CLEAR’’ and
press [ENTER] at step 2.
• While a program is being played back, [STOP C] works as follows;
Press [STOP C] and [PLAY B] next, so that the programmed
playback restarts.
Press [STOP C] twice and [PLAY B] next, so that playback
restarts from the first track in the original order. However, your
programmed playback can be restarted when you follow the
above steps. (Your programs are still stored until either the disc
tray is open or power is turned off.)
• To repeat the current track in the program, press [REPEAT]
repeatedly until “
TRACK’’ appears during playback.
• To repeat the entire program, press [REPEAT] repeatedly until
“
ALL’’ appears during playback.
Hint
• To exit the sequence, press [A-B] so that “OFF” appears.
• To cancel point A, press [CLEAR] at step 1.
• This function does not work in the other repeat modes.
• The A-B Repeat section can only be set within the current title (for
DVDs), or current track (for Audio CDs, Video CDs).
PLAY
MODE
STOP
ENTER
ENTER
ENTER
PLAY
TOTAL
1/4 2/3
1 3:30
5 5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
0:50:20
<Example: DVD>
Functions
REPEAT
PLAY
A-B
PLAY
A-B
MODE
STOP
ENTER
• Point B should be in the same
title or track as point A.
E6C61UD.indd 12E6C61UD.indd 12 2006/08/18 13:00:342006/08/18 13:00:34