Filter
Top Products
27
8. Cloning
On the USB which is containing the software upgrade you can clone the settings. The instant initial cloning will first
upgrade de software version and after will clone the settings from USB key.
Folders generate by TV on USB key are:
–TPM61HE (42HFL3233)
–TPM64HE (32HFL3233)
–TPM63HE (22/26HFL3233)
Cloning 22 and 26 inch can be exchanged.
For Welcome logo and Hotel Logo you have to use, the correct name for files and folders (case-sensitive).
9. Feature settings
[Multi RC]
This function allows that up to four televisions can be installed in a room whereas every TV will listen to its own RC.
Once the TV is set, also every RC can be set to remember its connected TV:
[Off] Multi RC is turned off; all TVs will listen to a ‘blue’ RC.
[Blue] The TV will listen to a ‘blue’ RC. Press and hold both the menu and blue button on the RC for about
five seconds to change the color of the remote.
[Green] The TV will listen to a ‘green’ RC. Press and hold both the menu and green button on the RC for
about five seconds to change the color of the remote.
[Yellow] The TV will listen to a ‘yellow’ RC. Press and hold both the menu and yellow button on the RC for
about five seconds to change the color of the remote.
[Red] The TV will listen to a ‘red’ RC. Press and hold both the menu and red button on the RC for about five
seconds to change the color of the remote.
Press and hold OK button for about five seconds to check the current color of the Multi Remote setting and the user
remote.
[MyChoice]
With MyChoice it is possible to activate two channel rings: R0 when MyChoice PIN is required, and R1 if not.
[Off]: Single channel map as configured during channel installation.
[On] Channel ring R0 to be available to guest in case of valid PIN entered; R1 if not.
[Theme TV]
With ThemeTV it is possible to activate a customizable user interface to select up to 15 different themes that
contains Channel references. ThemeTV can be presented on the display by means of pressing the ThemeTV button
on the RC, or automatically after starting up the TV:
[On]: Show ThemeTV on the display after pressing the ThemeTV button on the RC.
[Off]: ThemeTV disabled.
[Startup]: ThemeTV is show at startup, but the function can be trigger by pressing the ThemeTV button on
the RC.
[VSecure]
VSecure is the hospitality content scrambling method used by the Philips Hospitality TVs. If you are interested to use
it please contact the local Philips Hospitality TV sales representative.