Philips 1055D DVD Player User Manual


 
17
English
CLOCK/TIMER
Clock/Timer
IMPORTANT!
When in DVD/CD mode, it is not possible to operate
clock or timer function.
Setting the Clock
1 Press SYSTEM MENU to enter System Setup mode.
2 Press ( / ) to select the Clock Setup mode and press
£ to confirm.
3 Press à / á to change between 12 and 24 hour mode.
4 Press £ to enter clock adjustment mode.
The clock digits for the hours flash.
5 Press à / á to set the hour.
6 Press ( / ) to change the minute field.
The clock digits for the minutes flash.
7 Press à / á to set the minute.
8 Press £ to confirm the setting and return to normal
mode.
Setting the On/Off Timer
1 Press SYSTEM MENU to enter System Setup mode.
2 Press ( / ) to select the Timer Setup mode and press
£ to confirm.
3 Press ( / ) to select set on timer or set off timer :
ON TIME” or “OFF TIME”.
4 Press £ to enter set time mode.
5 Set time (refer to point 5-7 of “Setting the Clock”) and
press £ to confirm the setting.
6 Press à / á to select activating or deactivating the timer :
SET ON” or “SET OFF”.
7 Press £ to confirm and return to the last selected source.
Repeat steps 1-5 again to set the Off Time.
Note:
When the on time is reached, the player will switch on to
the last selected source.
Activating/Deactivating
On/Off Timer
1 Press SYSTEM MENU to enter System Setup mode.
2 Press ( / ) to select the Timer Setup mode and press
£ to confirm.
3 Press £ twice and press à / á to select
SET ON” or “SET OFF” mode.
4 Press £ to confirm the setting and return to the last
selected source.
Setting the Sleep Timer
This feature allows you to select a preset amount of time
after which the player will switch to standby mode
automatically.
Press SLEEP repeatedly to select a preset amount of time.
The selections are as follows (time in minutes):
90 60 30 15 OFF 90
When the Sleep Timer is activated, the “SLEEP” icon will
appear on the display.
Checking the remaining Sleep Time
When the Sleep Timer is switched on, you can check the
remaining time before the player switches to standby
mode.
Press SLEEP once.
The remaining time will be displayed.
Cancelling the Sleep Timer
To switch off the Sleep Timer after it has been activated.
Press SLEEP repeatedly until “OFF” is displayed.