Filter
Top Products
6
Preparation for use
This chapter shows you how to prepare the TV-Video
Combi for use.The TV-Video Combi automatically
seeks out and stores all available TV channels.
1.
1.After you have connected the aerial or cable,
confirm the picture on the TV screen with
.
2.
2.
The automatic TV channel search starts.
When automatic TV channel search is com-
plete,'AUTO TUNING COMPLETE' will
appear on the TV screen.
3.
3.The clock setting display appears on the TV
screen. [14PV235 / 21PV385]
4.
4.Check 'TIME'. If required, change the time-
with the number buttons .
5.
5.
Check 'DAY', 'MONTH' and 'YEAR'. If required,
change them with the number buttons .
6.
6.When all information is correct, save by
pressing .
The preparation for use is now complete.
Decoder allocation
Some TV channels transmit encoded TV signals
which can only be viewed with a purchased or
rented decoder.You can connect such a decoder
to this TV-Video Combi.The following function
will automatically activate the connected decoder
for the desired TV channel.
1.
1.Use or to select the programme
number which you would like to allocate the
decoder to.
2.
2.Press .The main menu will appear.
3.
3.Use or to select 'TUNER
SET UP'.Then press .
4.
4.Use or to select 'MANU-
AL TUNING'.Then press .
5.
5.
Use
or
to select
'DECODER'.
6.
6.Use to select 'ON'
(Decoder switched on).
7.
7.To end, press .
The decoder has now been allocated to this pro-
gramme number.
STATUS/EXIT
FWD 1- B
STOP C-LPLAY B-K
FWD 1- B
STOP C-LPLAY B-K
FWD 1- B
STOP C-L
PLAY B-K
MENU
0..9
P
-
P
+
STATUS/EXIT
0..9
0..9
PROG P+
EN
3. Installing your TV-Video Combi
The TV-Video Combi does not find any TV
channels during the search
• Check the cable connection of the aerial
(aerial socket), TV-Video Combi, TV.
•
The TV-Video Combi searches the entire fre-
quency range in order to find and save the
largest possible number of TV channels. It is
possible that the TV channels in your country
are broadcast in a higher frequency range. As
soon as this range is reached during the search,
the TV-Video Combi will find the TV channels.
PLEASE WAIT
START FINISH
❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚
Connecting additional devices
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on.The automatic channel search
will recognise them and save them.
TIME --:--
DATE --/--/--
SMART CLOCK [ON]
END=EXIT
Satellite receiver
If you are connecting a satellite receiver, please
read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must
install it as described in the next section.
MANUAL TUNING
PROG. P55
CHANNEL 055
→DECODER [OFF]
SKIP [OFF]
SELECT
KL CHOOSE B
END=EXIT
How can I switch off the decoder?
Use to select 'OFF' (Decoder
switched off).
FWD 1- B
T6460EZ(EN)_UK.qx3 04.1.28 1:19 PM Page 6