Filter
Top Products
EN
12
Problems and solutions for pro-
grammed recordings
Programming a recording
1.
1.Press . The main menu will appear.
2.
2.Select 'TIMER' with . Then press
.
3.
3.Select ONCE, DAILY, or WEEKLY recording
with . Then press .
If all TIMER blocks are in use, 'FULL' will appear
on the TV screen.
4.
4.Select TIMER block with .
5.
5.With buttons you can enter 'START'
(start time) , 'STOP' (end time) , 'PROG.'
(programme number) ‘VPS/PDC’ and 'DATE'.
6.
6.When all inputs are correct, press
. The programming information
is stored in a TIMER block.
7.
7.Insert a cassette with an intact security tab
(unprotected).
STATUS/EXIT
0..9
0..9
B1
LCKB
B1
LC
KB
MENU
The TV-Video Combi will not operate
* If you want to cancel the programmed record-
ing,press .
Cassette is ejected during recording
* The end of the tape was reached during
recording.
C/
AA
SELECT KL CHOOSE B
→ONCE
DAILY
WEEKLY
TIMER LIST
END=EXIT
Selecting once/daily/weekly recordings
Use to select from the following
options:
'ONCE': Recording once
'DAILY': Repeated daily recordings from
Monday to Friday
'WEEKLY': Repeated weekly recordings (every
week on the same day)
LCKB
Programming a recording from the external
sources
You can also programme recording from an
external source via the Scart socket AV1 or the
front A/V connectors AV2.
General information
Use a TIMER programming to automatically
start and stop a recording at a later time or date.
The TV-Video Combi will switch to the right pro-
gramme number and begin recording at the cor-
rect time. With this TV-Video Combi, you can pre-
programme up to eight recordings within a peri-
od of one year. To make a programmed record-
ing, your TV-Video Combi needs to know:
*the date you want to make the recording
*the programme number of the TV channel
*the start and stop time of the recording
*PDC on or off (14PV203/07, 14PV460/07)
This information is saved in a TIMER block.
7. Programming a recording (TIMER)
<14PV203/07, 14PV460/07>
What is 'PDC'?
'PDC' (Programme Delivery Control) is used to
control the start and duration of TV channel
recordings. If a TV programme starts earlier or
ends later than scheduled, the TV-Video Combi
will turn on and off at the correct time.
What do I need to know about 'PDC'?
Usually the PDC time is the same as the start
time. But if your TV guide shows a PDC time
which is different from the programme’s sched-
uled start time, e.g. 20.10 (PDC 20.14), you
must enter the PDC time exact to the minute. If
you want a start time different from the PDC
time, you must switch PDC off.
T6310EZ-I(EN).qx3 02.4.10 11:16 AM Page 12