Filter
Top Products
DUnder ’REP.’, use the P rB or AP q button to
select daily or weekly programming.
’Mo-Fr’: If you want to make a recording every day
from Monday to Friday.
’Mo-Su’: If you want to make a recording every day
from Monday to Sunday.
’WEEKL’: If you want to make a recording every
week on the same day of the week.
’ONCE’: If you want to make only one recording.
DUnder ’LP’, use the P rB or AP q button to
select the recording speed ’SP’ or ’LP’.
DUnder ’VPS/PDC’, use the P rB or AP q
button to switch ’VPS or PDC’ on or off.
f Confirm with the OK button when the information is
correct.
E ’Press STANDBY to start recording’
will appear on the screen. If you have programmed a
recording that should start within the next few minutes,
confirm with the STANDBYm button. If you have
programmed a recording that will start at some later point
in time, confirm with the OK button.
DA programmed recording can only start, when the
machine is switched to standby.
DIf you entered the wrong date for a daily/weekly
recording, your TV-VIDEO Combi will correct it
automatically.
g If you confirmed with the OK button, exit the menu with
the TIMERk button.
DThe programming information has been stored in a
TIMER block.
h Make sure that the cassette you have put in can be
recorded on.
How to check or change a TIMER
a Press the TIMERk button on the remote control.
b Select the line ’Timer programming’ with the
buttons P rB or AP q and confirm with the
SqC button.
c Select the TIMER you want to check or change with the
P rB or AP q button and confirm with the OK
button.
d Select the entry field with the DSr or SqC
button.
e Change any information with the P rB or APq
button or with the 0-9 buttons.
DUnder ’LP’, use the P rB or AP q button to
select the recording speed ’SP’ or ’LP’.
f Confirm with the OK button when the information is
correct.
g Confirm the message on the screen with the OK button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
DThe programming information has been stored in a
TIMER block.
h To end, press the TIMERk button.
i Make sure that the cassette you have put in can be
recorded on.
How to clear a TIMER
a Press the TIMERk button on the remote control.
b Select the line ’Timer programming’ with the
buttons P rB or AP q and confirm with the
SqC button.
c Select the TIMER you want to clear with the buttons
P rB or AP q .
d Press the CLEAR button.
e Switch off with the TIMER k button.
18