Filter
Top Products
4
Automatic Channel Search
1 Switch on with the
STOP h
button. Press the menu
buttons
D
and
C
simultaneously.
2 Select and confirm the line ’AUTO STORE’ .
The ’Automatic Channel Search’ function starts.
AUTO STORE
PRESS xyTO STOP
SEARCH
PLEASE WAIT
CHANNELS FOUND: 1
aaabbbbbbbbbbbbbbbbb
3 Wait until all TV channels have been stored.
All TV channels will be stored from programme number
69 downward.
How to search for a TV channel manually, you can read in
chapter 4 ’SPECIAL FEATURES’ in the section ’Manual
channel search’.
Note: Automatic Channel Installation (ACI), only for sets
with TELETEXT:
Some cable companies or broadcasters offer the pos-
sibility to install TV channels automatically with ’ACI’.
Information about the installation offered and how to
select it, will appear in the display.
This set will recognize and install TV channels with ’ACI’
automatically.
TV channels will be stored from programme number 1
onward.
If ’ACI’ cannot identify a TV channel, you can search for
it using the method as described in the section ’Manual
channel search’.
* If the ’Automatic channel search’ function is activated,
any previously programmed TIMER blocks will be
cleared.
You can store up to 69 TV channels.
Allocating channel numbers
1 Switch on with the
STOP h
button. Press the menu
buttons
D
and
C
simultaneously.
2 Select and confirm the line ’SORT’ .
SORT vw
C-21
FROM P01
TO P02
STORE
3 On the TV screen, in the line ’FROM’ , select the TV
channel to which you want to allocate a programme
number, e.g.: ’P 01’ .
4 In the line ’TO’ , select the required programme number,
e.g.: ’P 02’ .
5 Select and confirm the line ’STORE’ .
The allocated TV channels will be exchanged.
6 Repeat steps 3to 5until you have allocated a pro-
gramme number to all the required TV channels.
To finish, press the
MENU
button twice.