Filter
Top Products
f Press the OK button.
g Confirm the message on the screen with the OK button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
h Exit the menu with the TIMERs button.
E The programming information has been stored in a TIMER
block.
i Make sure that the cassette you have put in can be
recorded on.
Programming a recording with TELETEXT
With this function programming a recording will be
considerably easier. In TELETEXT you select the TV
programme you want record. All the required information for
recording will be transferred and stored in a TIMER block. You
can find more information on TELETEXT in the chapter ’TV SET
FUNCTIONS’.
a Select the TV channel you want to record from.
b Press TELETEXT e to activate TELETEXT. Your TV-VIDEO
Combi will now show TELETEXT for the TV channel you
have selected.
c With the number buttons 0-9 select the TELETEXT
programme guide page. This page can be stored as the
preferred page (see paragraph ’How to read TELETEXT’).
d Press TIMERs .’PLEASE WAIT’ will briefly appear at
the bottom of the screen.
Next, a highlighted title line will appear.
DIf ’NO TIMER INFORMATION ON THIS
PAGE’ appears, TELETEXT programming cannot be
used for the programme you have selected. In this
case, you should programme the recording as
described in the paragraph ’programming a
recording’.
e Use the BP r and APq buttons to move the cursor
(h) to the TV programme you want to record.
DIf you want to cancel this function, press
TELETEXT e .
f Press OK . The timer menu will appear. The required
programming information has been stored in a TIMER
block. Please check the information.
TIMER PROGRAMMING
VPS
DATEPROG. START END LP PDCREP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - * ONCE
ã è Store:
« press OK
g For changing the TIMER information, select the entry field
with the DSr or SqC button. Change the
information with the BP r or AP q button or with
the number buttons 0-9 .
DUnder ’REP.’, use the BP r or APq button to
select daily or weekly programming.
’ONCE’: Recording only once.
’Mo-Fr’: Recording from Monday to Friday.
’Mo-Su’: Recording from Monday to Sunday.
’WEEKL’: Recording every week on the same day.
DUnder ’VPS/PDC’ switch ’VPS/PDC’ on or off with
the BP r or APq button.
DUnder ’LP’ select the recording speed ’SP’ or ’LP’
with the BP r or AP q button.
h When all information is correct, press OK .
i Confirm the message on the screen with OK .
A Timer recording can only start, if the set is not being
used for other video recorder functions (e.g. playback).
DThe programming information has been stored in a
TIMER block.
j Exit the menu with the TIMERs button.
k Make sure that the cassette you have put in can be
recorded on.
21