Filter
Top Products
Installation 7
Fine tune
In case of poor reception, you can improve
the reception by fine tuning.
TV channels broadcast by a cable
company
Some cable systems operate with frequency
offsets that are as much as + 2 MHz or - 2
MHz. See Conversion tables, p. 19.
Off-air channels
The frequencies for TV channels used by a
cable company may differ from the
frequencies of off-air TV channels. Consult
the tables on p. 18.
& Select Fine in the Manual Program menu
with the cursor up/down.
é Press the cursor left/right to fine tune for
the best picture and sound.
“ Press the OK button.
‘ Press the EXT button to exit the menu.
Auto ogramme
Fine
Storage Memory
oœ p π
0-9 MENU
Channel TV 13
& Select Manual Program in the channel
menu.
é Press the OK button to enter the
Manual Program menu.
The current channel number is displayed.
“ Press the cursor left/right to select
another channel number.
‘ Select Storage with the cursor up/down.
( Press the cursor left/right to select
Memory or Erase.
The selected channel is memorized or
erased.
Memorizing/Erasing current channel
Buttons in front of the TV
TV / VIDEO MENU
OK
VOL
CH / PR
_
+
_
+
B
ON / OFF
Should your remote control be lost or broken
you can still operate your TV with the buttons
in front of the TV.
ON/OFF: Press the power ON/OFF button to
turn the TV on or off
TV/VIDEO: Press repeatedly to select TV,
VIDEO, S-VIDEO, COMPONENT or PC
monitor mode
MENU: Press repeatedly to display each menu
OK: Press this button to activate your choice
when in the menu
- VOL + :
• Press - or + to select a menu item;
• Press - or + to adjust the volume;
• Press - or + to adjust the menu settings.
- CH/PR +:
• Press - or + to browse through the TV
channels which are not erased;
• Press - or + to select a menu item;
• To turn the TV on from standby.
B: Turns the TV on from standby or off to
standby.
The B indicator lights up brightly when
the TV is in standby, dims when the TV
is turned on.
268E(15") en 1997/04/03 9:24 AM Page 7