32 EN
[Time downloading]
[Off]: • Sets the time manually from the
[Time setting] menu.
[On]: • Sets the time by downloading
from the signal system in the [Download
program] menu.
[Download program]
(Appears if you select [Clock setup] ≥ [Time
download] ≥ [On]). Selects the programme
where time downloading must be performed.
[Time offset]
(Appears if you select [Clock setup] ≥ [Time
download] ≥ [On]) Selects the correct time
zone which is downloaded from [Download
program].
[Buzzer volume]
Selects the volume of the clock buzzer.
How to set the TV alarm?
1 Selects [Hospitality] in the [Application]
menu.
2 Sets the time either from [Time setting] or
[Download program]. When set, the time
will be shown on the clock display.
3 Press ALARM ON on the Guest remote
control to access the [Alarm] menu.
[Alarm time]: • Sets the alarm time.
[Alarm status]: • Displays current alarm
status.
[Alarm off]:• Selects [Yes] to cancel
the alarm or [No] to keep the alarm
enabled.
Note
When • the alarm is enabled, icon
appears on the clock display.
Press • ALARM OFF on the Guest
remote control to cancel the alarm,
icon disappears from the clock display
simultaneously.
Speaker settings
[TV speaker enable]
[Off]: • Disables the TV speaker. The
headphone volume functions normally.
[On]: • The TV speaker is enabled.
(Default setting).
[Independent main speaker mute]
This option only appears when you select [TV
speaker enable] ≥ [On].
[Off]: • Press ¬(MUTE) or”+/- on the
Guest remote control will affect both
the TV speaker and the headphone
volume (Default setting)
[On]: • Press ¬(MUTE) on the Guest
remote control will affect the TV
speaker volume only. The headphone
volume functions normally.
Note
If the TV speaker is muted independently, •
press”+/- on the Guest remote control
will only affect the headphone volume.
[Default main speaker volume]
Only appears when you select [Independent main
speaker mute] ≥ [On]. Users can set the TV
speaker and headphone volume to a certain level
as the default setting. This option can avoid sudden
high-volume when TV speaker is turned on again
from independently mute.
Installation
[Blank channel]
The Blank channel function disables the display
of video on the TV, but does not affect the audio
output. This function can be used for audio
applications (example: music-only channels, and so
on) which do not necessarily require the display
of video.
1 Enters the [Blank channel], the list of all
channels appear.
2 Selects one or more channels and press OK
to mark.
3 The channels marked with [X] will not
display video on the TV.