Filter
Top Products
PRESENTATION OF THE LCD TELEVISION
Television keys
¥ 2 : to switch the TV on or off.
• VOLUME + / – : to adjust sound level.
• PROGRAM + /– : to select programmes.
To access or close menus, press the VOLUME + / – keys simultaneously.
The PROGRAM + / – keys can be used to select an adjustment and the
VOLUME + / – keys make that adjustment.
Adjustable stand
The stand has swivel and tilt functions. For swivelling function, ensure the arrows
at the bottom of the stand arm and the swivel base are aligned in the center (see
diagram on the right). For tilting function, you can tilt the set backward or forward
to your preferred angle.
Note : The stand can be removed and the LCD TV can be installed on the wall.
This set has four mounting interfaces fulfilling VESA specifications. Pull out the
back plate cover to access the four installing interfaces. Installation of the LCD
TV on the wall should be carried out by qualified servicemen.Improper or
incorrect installation may render the set unsafe.
LED light and infrared sensors
Aim remote control at infrared sensors to activate TV controls.
Rear connectors
Located at the rear of the set.
Bottom connectors
Located at the bottom of the set.
2
2
1
3
PROGRAM
VOLUME
4
5
1
2
3
4
5
2
Gently pull out the cover to locate all the sockets at the bottom of the set.
Use the aerial connection lead (not supplied) and connect the aerial
socket of the TV to the ¬ socket.
Insert the radio aerial lead supplied into the FM ANT socket of
the TV.
Connect the mains cord to the television power inlet and the
mains plug into the wall socket.
Press the 2 button to switch on the television set.
BASIC LCD TV INSTALLATION
L
R
FM ANTENNA
FM ANT
:
Wall socket
Aerial socket
PROGRAM
VOLUME
4
1
2
3
4
3
1
2
Bottom of
swivel base
L
R
1
Pull out the battery cover.
Place the two batteries in the remote. Be sure the (+) and (–)
ends of the batteries line up correctly (the inside of the case is
marked).
Insert battery cover and the remote control is now ready for use.
Note : The battery supplied with the set does not contain mercury
or nickel cadmium so as to protect the environment. When discarding
your batteries, use the recycling options available.
2
3
REMOTE CONTROL OPERATION
Do the following steps to ensure that your remote control is ready for operation.
L
ISTING THE
A
CCESSORIES
TV mains cord
FM radio aerial lead
Remote Control
Screw (x 2)