Filter
Top Products
16
INTERFACE (for SmartConnect/SmartCard-R/Y models only)
Enables the communication of the TV with the DCM when YES is selected.
This is specifically
applicable to the Interactive System TV, providing the interactivity feature between a DCM card
of the Service Provider and the dedicated System TV.
AUDIO/VIDEO MUTE
To blank the screen when no signal is received. Select OFF (no blanking), BLACK (blank the
screen black) or BLUE (blank the screen blue).
AUDIO/VIDEO OUT MUTE
Disables all output from the TV to the external Audio and Video output connectors if YES is
selected. The default setting is NO.
MONITOR OUT RF
Select YES to switch all output from the TV to the external Audio/Video output connectors
to the same as the input RF signal. Select NO to switch all output from the TV to the external
Audio/Video output connectors to the same source as what is displayed on the TV. The default
setting is NO.
WELCOME MESSAGE
This item is used to create, edit or delete a welcoming message. You can input up to 2 lines,
with a maximum of 20 characters (inclusive of space) per line. Highlight WELCOME
MESSAGE in the TV SETUP menu and enter its sub menu by pressing
(
˙
).
Note: During creating, editing or deleting a message, you may wish to move from LINE 1 to
LINE 2 or vice versa. Press the key
MENU
to exit from the present line. Highlight the new line and
proceed.
MESSAGE
DISPLAY OFF
LINE 1 É
LINE 2 É
CLEAR É
TO CREATE MESSAGE WITH LINE 1:
Highlight LINE 1 with the (
¸
) key. Press the (
˙
) key to begin. The cursor
will appear in the first character position. To input characters, press the (
˚
) or
(
¸
) key to select from the list:- A to Z, 0 to 9,
❜
, –, •,/, :, =, ?, ;, <, >, @ or space. Press the
(
˙
) key to go to the next character position or the (
˝
) key to go to the
previous character position.
TO EXIT LINE 1:
Press the
MENU
key.
p13-20_081205 12/8/05, 5:24 PM16