Philips 21PT3429/94 CRT Television User Manual


  Open as PDF
of 15
 
Use timers
You can set timers to switch the TV to standby
ataspeciedtime.
Set the time
1 Press MENU.
2 Select [FEATURES] > [TIMER] >
[CLOCK].
3 Press to set the hour and press to
conrm.
4 Press to set the minutes and press
toconrm.
5 Press MENU to exit.
Set timer options
1 Press MENU.
2 Select [FEATURES] > [TIMER] .
3 Press to select from the following
options and adjust:
• [ON TIME]Sets a time for the TV to
turn on from standby.
• [ON CHANNEL]Sets the channel
that is displayed when the TV is
turned on from standby.
• [OFF TIME]Sets a time for the TV to
turn off to standby.
• [SLEEP TIME]Sets a delay (in
minutes) after which the TV is
turned off to standby.
• [CH SWITCH]Sets a time for the
TV to switch to another channel.
• [SWITCH TO]Sets a channel
to switch to when the TV is
programmed to switch to another
channel.
4 Press MENU to exit.
Use smart sound
Usesmartsoundtoapplypre-denedsound
settings.
1 Press SMART repeatedly to cycle
through the four settings.
• [PERSONAL]Settings are set to your
preference.
• [VOICE]Emphasises high tones
(treble boosted).
• [THEATRE]Emphasises sensation to
action (bass and treble boosted).
• [MUSIC]Emphasises low tones (bass
boosted).
2 Press to exit.
Note
Smart sound is available only in some models. •
Adjust sound settings
1 Press MENU
2 Press the navigation buttons to enter the
[SOUND] menu.
3 Press to select from the following
settings and adjust:
• [TREBLE]Adjusts the treble level.
• [BASS]Adjusts the bass level.
• [BALANCE]Adjusts the balance of
the right and left speakers to best
suit your listening position.
• [SURROUND]Enables spatial sound.
Note
Some of the sound settings may not be •
available in some models.
 previous next