Filter
Top Products
3
Remote control keys
To display / clear the program number,
name (if it exists),time,audio mode and
time remaining for the sleep feature.
Press the key for 5 seconds to activate
permanent display of the number.This
key is also used to exit from the menu.
Screen information / permanent no.
Surround Sound (only available
on certain versions). To activate /
deactivate the surround sound
effect.In stereo,this gives the
impression that the speakers are
further apart.For models equipped
with Virtual Dolby Surround*,you
can experience Dolby Surround
Pro Logic sound effects.In mono,a
stereo spatial effect is simulated.
VCR key *
Pre-set sound
Used to access a series of stored
settings:Speech,Music,Theatre
and return to Personal.
Menu
To call up or exit the menus.
Volume
To adjust the sound level
Cursor / Format
These 4 keys are used to navigate
through the menus.The îÏ
keys are used to enlarge or
compress the picture vertically.
Number keys
Direct access to the programmes.
For a 2 digit program,enter the
2nd digit before the dash
disappears.
Selection of EXT socket
Press several times to select
EXT1,EXT2,S-VHS and AV.
Radio / TV mode
To switch the TV set to radio or
TV mode (for versions equipped
with radio).
Standby
Lets you place the TV set on
standby.To turn on the TV,press
P @@,b,0 to 9 (or Â).
Teletext keys (p.8),VCR keys
(p.11) and list of radio stations ı
(p.5)
Sleep
To select an automatic standby after a
preset time (from 0 to 240 minutes).
Format
To enlarge or compress the
picture vertically
Pre-set image
Used to access a series of stored
settings:
Rich,Natural,Soft,
Multimedia and return to Personal.
Mute
To mute or restore the sound.
Program selection
To access the next or previous
programme.The number,(name)
and sound mode are displayed for
a few moments.
For some programs,the title of the
program will be displayed at the
bottom of the screen.
Sound mode (only available on
stereo versions)
Used to force programmes in
Stereo to Mono or,for bilingual
programs,to choose between
Dual I or Dual II.For TV sets
equipped for Nicam reception,
depending on the programmes,
you can force the Stereo Nicam
sound to Mono or select between
Nicam Dual I,Nicam Dual II and
Mono.
The
Mono indication is red when in
forced position.
Teletext (p.8)
Teletext keys (p.8)
or VCR keys *
* “Dolby”and the double-D symbols £
are trademarks of the Dolby
Laboratories Licensing Corporation.
Manufactured under license of Dolby
Laboratories Licensing Corporation.
* VCR key
The remote control lets you control the main functions of the VCR.
Press and hold down the VCR key located on the side of the remote control,then press one of the keys to access
the VCR functions:b %∫HîÏȬP @# · ¢ÊÆ09
The remote control is compatible with all VCRs using the RC5 standard.