Filter
Top Products
13
Connecting peripheral equipment
Carry out the connections shown opposite,using a good
quality eu
roconnector cable.
If your video recorder does not have a euroconnector soc
ket,the only
connection possi
ble is via the aerial cable.You will therefore need to
tune in your video recorder's test signal and assign it prog
ramme
number 0 (re
fer to manual store, p.5).
To reproduce the video recorder picture, press 0.
Video
recorder with decoder
Connect the decoder to the second eu
roconnector socket of
the video
recorder.You will then be able to record scrambled
transmissions.
Video recorder
Satellite receiver,decoder,games,etc.
Ma
ke the connections as shown opposite.
To connect a Hi-fi unit,use an audio connecting cable and
connect :
- The ”L” and”R” outputs of the TV set to an ”AUDIO IN” ”L”
and ”R” of the Hi-fi unit.
- The ”PCM” output of the TV set to a ”DIG IN” input of the
amplifier (amplifier with digital coaxial input).
Other equipment
Amplifier
R
C
V
5 64
87 9
0
Á
Ø
To select connected equipment
Press the n key to select EXT1,EXT2* (and AV ) f or the side connections.
Most equipment (decode
r, video recorder) carries out the switching itself.
Make the connections as shown opposite.
Headphones
When headphones a
re connected,the sound on the TV set
will be cut
.The @ ” # keys are used to adjust the volume
level.
The headphone impedance must be between 32 and 600 Ohm
s.
Side connections
* only available for the versions with EXT2.