Filter
Top Products
Selecting the recording speed (SP/LP)
You can reduce the recording speed by half. This makes it
possible to record, for example, eight-hours instead of
four-hours on an ’E240’ (four-hour) cassette.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’SPECIAL SETTINGS’ with the buttons
=P r or ;P q and confirm with the SqP
button.
c Choose the desired recording speed in the line ’RECORD
SPEED’ using the buttons QSr or SqP .
D’LP’: LongPlay = half recording speed (double
recording period).
’SP’: StandardPlay = normal recording speed.
d Confirm with the OK button.
e To end, press the MENU button.
DThe picture quality with LP recordings will not be as
good as it is with SP recordings.
DFor playback, the correct speed will automatically
be selected.
Automatic recording from a satellite
receiver (SAT RECORDING)
You can only use this function, if you have a satellite receiver
which can control other equipment via a scart cable and a
’programming’ function.
DMake sure that the scart socket EXT of the
TV-Video Combi is connected to the respective scart
socket of the satellite receiver. Please read chapter
’CONNECT THE TV-VIDEO COMBI’, section ’Connect
decoder or additional equipment’.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’SPECIAL SETTINGS’ with the buttons
=P r or ;P q and confirm with the OK button.
SPECIAL SETTINGS
RECORD SPEED W SP X
OSD AUTO
SAT RECORDING OFF
EXIT: MENU STORE: OK
c Select the line ’SAT RECORDING’ with the buttons
=P r or ;P q .
d Select ’ON’ with the buttons QSr or SqP .
DIf you want to switch off the function, select ’OFF’.
e Confirm with the OK button.
f To end, press the MENU button.
g Place a cassette in the machine.
h Programme the satellite receiver with the desired
information for the recording (programme number of the
TV channel, start time and end time).
DThe information on how to programme your satellite
receiver can be found in the instruction manual for
your satellite receiver.
i To end, press the MENU button.
Now the TV-Video Combi is ready to record. The start and end
of the recording are controlled via the scart socket EXT .
DIf one or more recordings have been programmed,
the TIMER lamp (TIMER5) at the front of the machine
lights up.
19