Filter
Top Products
d Select one of the options indicated with the menu buttons
C or D .
’MAX’: The OSD appears for a few seconds each time an
operating mode is selected and then disappears.
’MIN’: The OSD is reduced to a minimum.
’PROGR.’: The programme number is always shown.
’COUNTER’: The tape position is always shown.
e Confirm with the OK button.
f To end, press the MENU button.
DWith the OK button you can superimpose the On
Screen Display of current operating mode on the TV
screen.
Switching to 16:9 wide screen picture
If you are using a cassette with 16:9 wide screen recordings,
you can switch this function ’ON’. The TV-VIDEO Combi will
now automatically switch to wide screen.
a Press the MENU button. The main menu appears.
b Select the line ’Setup’ with the B or A button and
confirm with the C button.
SETUP
Parental control OFF
Display MAX
Format 16:9 NORMAL
Speakers ON
Sound only ON
VCR 1/2 VCR 1
ã Exit:
« press MENU
c Select the line ’Format 16:9’ with the A or B
button.
d Select one of the possibilities with the C or D button.
’NORMAL’ : Normal size picture.
’EXTEND.’ : Extended size picture.
’COMPR.’ : 16:9 format picture.
DWhen you watch TV you can select between
’EXTEND.’ and ’NORMAL’.
e Confirm with the OK button.
f To end, press the MENU button.
Switching the internal speakers on or off
If you want to connect a HiFi-stereo set or a ’Dolby Pro Logic’
decoder to the socket AUDIOOUT L/R (audio output left/right)
and switch off the internal speakers, proceed as follows:
a Press the MENU button. The main menu will appear.
b Select the line ’Setup’ with the B or A button and
confirm with the C button.
SETUP
Parental control OFF
Display MAX
Format 16:9 NORMAL
Speakers ON
Sound only ON
VCR 1/2 VCR 1
ã Exit:
« press MENU
c Select the line ’Speakers’ with the B or A .
d In the line ’Speakers’ select ’OFF’ with the D or
C button.
e Confirm with the OK button.
f To end, press the MENU button.
DIf you want to switch the speakers on again, select
’ON’ in line ’Speakers’.
26