Philips 23IF9946/12 Flat Panel Television User Manual


  Open as PDF
of 4
 
1) Install a USB Wireless Network Adaptor (USB V.1.1 or higher) to your PC (not included).
F2) Installing the Streamium LCD TV without a wireless home network
For this option, you do not have a wireless home computer network installed but you
want to connect the Streamium LCD TV to your PC.
Note: Internet access is not available if the Streamium LCD TV is connected directly to PC using
this method.
2) Make sure the PC is switched on and the Philips Media Manager software is installed and active
(an icon will appear at the lower right hand corner of your PC monitor).
3) Switch on the Streamium LCD TV. Press the SELECT button on the remote control repeatedly until
STREAM indicator lights up.
4) Press the HOME LINK button on the remote control.
Note: Do not press the INTERNET button at this time.
5) If asked, select from the list of wireless network names (SSID) presented to you on the TV screen.
Select ‘Philips’ only if Philips adaptor CPWUA054 is used.
Explore the Home Link menu on the TV screen.
1) Use a crossover Ethernet cable* if you want to connect the Streamium TV directly to your computer
or use a straightthrough Ethernet cable* if you want toconnect the Streamium TV to an existing
computer network.
F3) Installing the Streamium LCD TV to your PC using a network cable
For this option, you want to connect the Streamium LCD TV to your PC using a
CAT.5 shielded ethernet cable* (STP).
Note:
– Your PC must have a Ethernet connector (RJ45) available.
– Internet access is not available if the Streamium LCD TV is connected directly to PC using the
cable.
– Internet connection is available if the Streamium LCD TV is connected via cable or wireless onto
a network that has internet connection.
2) Make sure the PC is switched on and the Philips Media Manager software is installed and active
(an icon will appear at the lower right hand corner of your PC monitor).
3) Switch on the Streamium LCD TV. Press the SELECT button on the remote control repeatedly until
STREAM indicator lights up.
4) Press the HOME LINK button on the remote control.
Note: Do not press the INTERNET button at this time.
5) Explore the Home Link menu on the TV screen.
*) Cables not included.
3139 125 33591
QUG_LCDTV_English.qxd 20-09-2004 16:59 Pagina 4
ENGLISH
 previous