Filter
Top Products
A
Note : Ensure that the TV is
turned off.
For the System SmartCard,
insert the SmartCard into the
SmartCard slot on the rear of
the TV (available for certain
models only) and connect the
other cables as directed by the
System provider.
After SmartCard has been
inserted and the cables
connected, turn on the TV.
B
Note: The default setting in
the Communication menu is
OFF. If a System SmartCard
or System Box is used with
this TV, the Communication
menu item must be set to
the correct communications
protocol. For purposes of
providing an example only,
this Guide will refer to SP - I2C
as the communications
protocol.
In the SETUP menu, select
COMMUNICATION.
Press the Cursor Right button
to enter COMMUNICATION
menu. Press the Cursor Right
button to select SP - I2C.
Press the Cursor Down button
to select ENABLE CARD SLOT.
Press the Cursor Right button
to select YES in the ENABLE
CARD SLOT option (if applicable).
Press the Cursor Down button
to select STORE and press the
Cursor Right button to store
selections.
Sample of
System
SmartCard
Connect to the Data 1 (RJ 12)
connector at the rear of the TV.
Sample of
System box
For the System Box, insert the
RJ12 cable of the System box to
the DATA 1
1
(RJ12) connector on
the rear of the TV and connect
the other cables as directed by the
System provider.
After all the connection of cables
are completed, turn on the TV.
POWER
SLEEP
GUIDE
CH
CC
RESET
SMART
GUEST
DCM
SETUP
TEXT
RECALL
M
A/CH
1
4
7
8
0
9
2
56
3
+
++
_
COMMUNICATION SP - I2C
STORE >
ENABLE CARD SLOT YES
COMMUNICATION
DCM TYPE >
7 Installing a System SmartCard or System Box