Filter
Top Products
AV (AUDIO
/VIDEO) INPUT CONNECTION
4
L/Mono
Monitor out
VIDEO
S-VIDEO
AV1 in
Y
Pb
Pr
AV2 in
AUDIO
R
COMPONENT VIDEO INPUT
AUDIO OUT
R L
S-VIDEO
OUT
ANT/CABLE
OUT
VIDEO
OUT
1
AUDIO OUT
R L
S-VIDEO
OUT
ANT/CABLE
OUT
VIDEO
OUT
3
4
5
7
1
2
2
4
3
5
7
Audio and video cables are not sup-
plied with the TV, but are available
from Philips or electronics retailers.
HELPFUL HINT
Audio In
(Red and
White)
VCR Two (or
accessory device) (Equipped with
Video and Audio Output Jacks)
Video In
(Yellow)
Back of VCR
Back of TV
AV 1
Connection
AV2 Connection
VCR One (or
accessory device) (Equipped with
Audio and Video Output Jacks)
T
he TV’s audio/video input jacks
are for direct picture and sound
connections between the TV and a
VCR (or similar device) that has
audio/video output jacks. Both the
AV1 and AV2 Input Jack connec-
tions are shown on this page, but
either one can be connected alone.
Follow the easy steps below to con-
nect your accessory device to the
AV1 and AV2 IN Jacks located on
the back of the TV.
1
Connect the VIDEO (yellow)
cable to the VIDEO AV 1 IN (or
AV2 IN) jack on the back of the
TV.
2
Connect the AUDIO (red and
white) cables to the AUDIO
(left and right) AV 1 IN (or AV2
in) jacks on the rear of the TV.
3
Connect the VIDEO (yellow)
cable to the VIDEO OUT jack
on the back of the VCR (either
one or two) or accessory device
being used.
4
Connect the AUDIO (red and
white) cables to the AUDIO (left
and right) OUT jacks on the rear
of the VCR (either one or two) or
accessory device being used.
5
Turn the VCR (either one or
two) or accessory device and
the TV ON.
6
Press the CH+ or CH- buttons
set the TV to its AV1or AV2 chan-
nel.
7
With either of the VCRs (or
accessory devices) ON and a
prerecorded tape (CD, DVD,
etc.) inserted, press the PLAY
button to view the tape on the
television.