Philips 28PT4404/30 CRT Television User Manual


 
7
To select connected equipment
Press to select EXT(1) and,on models with 2 euroconnector
sockets: EXT2 and Y/C2 (S-VHS signal on EXT2).
The switch is automatic on most appliances (decoders, etc.).
Depending on the model,s o c kets are on the front (sometimes
under a flap) or on the right-hand side of the set.
Headphones (Only available on certain models)
When the earphones are plugged in, the sound on the set is cut
off.Adjust the volume using the a keys.
The headphones must have an impedance of between 32 and 600 ohms.
Camcorder
Certain models are equipped with AUDIO/VIDEO connections.
You will find 1 video input + 1 sound input (mono versions) or
2 sound inputs left (L) and right (R) on stereo versions.Make
the connections, then use the key to select EXT (or EXT2
for models with 2 euroconnector sockets).The switch between
the front and rear sockets is automatic with priority on front
sockets.
For a monophonic camera, connect the sound signal to the AUDIO L
input. Use the key to reproduce the sound through the left and
right TV speakers.
Video recorder (only)
Connect as shown using a good quality euroconnector
cable.
If your video recorder does not have a euroconnector socket, the
only connection possible is via the aerial cable.You will therefore
need to tune in your video recorder test signal and assign it
programme number 0 (see manual store,p. 3).To reproduce the
video recorder picture, press .
Video recorder with decoder
Connect the decoder to the second euroconnector on the
video re c o rd e r.You can then re c o rd scrambled transmissions.
Satellite receiver, decoder, DVD, games,etc.
For sets equipped with two euroconnector sockets,it is
best to connect the equipment which produces RGB signals
(digital decoder, DVD drives,games, etc.) to EXT1 and the
equipment which produces S-VHS signals (S-VHS and Hi-8
video recorders) to EXT2.
Video recorder
Connecting other appliances
Depending on the model, the TV is equipped with 1 or 2 euroconnector sockets, EXT1 and EXT2.
The EXT1 socket controls audio video input/output and RGB input.
The EXT2 socket (if available) controls audio video input/output and S-VHS input.
Front panel connections (Only available on certain models)
Other equipment
L9 1871.1 GB 1/8 3/10/01 14:03 Page 7