Philips 28PW6108/01 Flat Panel Television User Manual


 
3
Remote control keys
To display / clear the program
number,name (if it exists),time,
audio mode and time remaining for
the sleep feature.Press the key for
5 seconds to activate permanent
display of the number.This key is
also used to exit from the menu.
Screen information/permanent no.
Surround Sound
(only available on certain versions)
To activate / deactivate the
surround sound effect.In stereo,
this gives the impression that the
speakers are further apart.For
models equipped with Virtual
Dolby Surround*,you can
experience Dolby Surround Pro
Logic sound effects.In mono,a
stereo spatial effect is simulated.
VCR key (p.11)
Pre-set sound
Used to access a series of stored
settings:Speech,Music,Theatre
and return to Personal.
Menu
To call up or exit the menus.
Volume
To adjust the sound level
Cursor
These 4 keys are used to move
around the menus or provide
direct access to the different 16:9
formats (p.9).
Number keys
Direct access to the programmes.
For a 2 digit program,enter the
2nd digit before the dash
disappears.
Selection of EXT socket
Press several times to select
EXT1,EXT2,S-VHS and AV.
Radio / TV mode
To switch the TV set to radio or
TV mode (for versions equipped
with radio).
Standby
Lets you place the TV set on
standby.To turn on the TV,press
P @@,b,0 to 9 (or Â).
Teletext keys (p.8),VCR keys
(p.11) and list of radio stations ı
(p.5)
Sleep
To select an automatic standby after a
preset time (from 0 to 240 minutes).
16:9 modes (p.9)
Pre-set image
Used to access a series of stored
settings:Bright,Natural,Soft,
Multimedia and return to Personal.
Mute
To mute or restore the sound.
Program selection
To access the next or previous
programme.The number,(name)
and sound mode are displayed for
a few moments.
For some programs,the title of the
program will be displayed at the
bottom of the screen.
Sound mode
Used to force programmes in
Stereo to Mono or,for bilingual
programs,to choose between Dual
I
or Dual II.For TV sets equipped
for Nicam reception,depending on
the programmes,you can force the
Stereo Nicam sound to Mono or
select between Nicam Dual I,
Nicam Dual II and Mono.
The Mono indication is red when in
forced position.
Teletext (p.8)
Teletext keys (p.8)
or VCR keys (p.11)
* “Dolby”and the double-D symbols £ are trademarks of the Dolby Laboratories Licensing Corporation.
Manufactured under license of Dolby Laboratories Licensing Corporation.