Filter
Top Products
Remote control keys
Standby
Lets you place the TV set on standby.
To turn on the TV, press CH + or –,
, AV, A/CH or digit keys.
AV channel selection
Press several times to select AV1,
CVI, AV2, YPbPr or Side.
Personal Zapping
You can surf up to 10 personal
channels for each key (p. 12)
Delete Personal Zapping list
Deletes stored channels from
Personal Zapping list (p. 12)
Smart Picture
Used to access a series of stored
settings: Rich, Natural, Soft, DVD/
VCD or Personal.
Incredible Surround
To enable/disable the Incredible
Surround feature. In stereo, the
speakers appear further apart. In
mono, a pseudo-spatial effect is
obtained.
During stereo transmission, to
switch from Stereo to Mono.
During dual sound transmission, to
switch betwen language or .
Channel selection
To access the next or previous
channel. The number and sound
mode are displayed for a few
moments whenever you select a
new channel.
Mute
To mute or restore sound.
Sleeptimer
Add Personal Zapping list
Adds and stores channels into
Personal Zapping list (p. 12)
Smart Sound
Used to access a series of stored
settings: Theatre, Music, Voice or
Personal.
Menu
To call up or exit menus.
Cursor
These 4 keys are used to move
around the menus or provide direct
access to the different picture
formats
Volume
To adjust the sound level.
Digit keys
Direct access to the channels. For
a 2-digit channel, enter the 2nd
digit before the dash disappears.
On screen display
To display/clear the on screen
information. Hold down key for 3
seconds to activate permanent
display of channel number. This key
is also used to exit from the menu.
Alternate channel
Switches between the current
and the previous channel.
A/C
POWER
Not applicable.
(For NTSC version: Select Mono,
Stereo, or SAP).
5