Philips 26PW8402/37, 30PW8402/37, 34PW8402/37, 30PW8502/37, 34PW8502/37, 30PW850H CRT Television User Manual


 
10
HOW TO USE THE SOUND ADJUSTMENT CONTROLS
Treble – enhances the high frequency sounds.
Bass – enhances the low frequency sounds.
Balance adjusts the level of sound coming from the
left and right speakers.
AV L (Auto Volume Leveler) - when On, AVL will
level out the sound being heard when sudden changes
in volume occur during commercial breaks or channel
changes.
Dynamic Bass - enhances the low frequency sounds.
Incr. Surround - adds greater depth and dimension to
TV sound. Select from Incr. Surrourd, Dolby Virtual or
Stereo sound (if Stereo) or Dolby Virtual, Spatial or
Mono (if Mono).
SAP (Secondary Audio Programming)– sent as a
third audio channel, a SAP signal can be heard apart
from the current TV program sound. Note: If SAP is
not available, “Not Available” will appear on the
screen.
Audio Out – select from Variable or Fixed. When
Variable is selected, change the volume at the TV using
the TV’s remote control. If fixed is selected, change
the volume at the external device’s audio controls.
Speaker -turn the TV speaker On or Off. When a Hi-
Fi system is used, turn the TV speaker Off to hear the
sound from the Hi-fi system instead of the TV’s speak-
ers. When no external audio system is connected, On
must be selected to hear sound coming from the TV.
HELPFUL HINT
OK
1
2
3
4
5
6
7
8
0
9
Select
SLEEP
ACTIVE
CONTROL
CC
AV
CLOCK
MENU
EXIT
PICTURE
SOUND
STATUS
SELECT
PIC SIZE
MAIN
FREEZE
QuadraSurf
TM
PROGRAM
LIST
TV/VCR
REC
SAP
A/CH
SATVCR AMP ACCDVD
VOL CH
MUTE
Power
Menu
Picture Brightness
Sound Color
Features Contrast
Install Sharpness
Color Temp.
Menu
Sound
Treble 65
Bass
Balance
AVL
Dynamic Bass
OR
Bass 60
OR
Menu
Picture Treble
Sound Bass
Features Balance
Install
AVL
Dynamic Bass
Balance 0
AVL Off On
OR
Incr. Surround Mono
Spatial
Dolby Virtual
OR
Stereo Stereo Mono
OR
OR
SAP Off On
OR
Audio Out Fixed Variable
OR
Speaker Off On
3
5
4
2
5
5
1
6
4
2
5
Dynamic Bass
Off On
OR
T
o adjust your TV sound controls, select a channel and
follow these steps.
1
Press the
MENU/SELECT
button on the remote
control to show the onscreen menu.
2
Press the CURSOR UP or CURSOR DOWN but-
ton to highlight Sound.
3
Press the CURSOR RIGHT button to enter the
sound menu.
4
Press the CURSOR UP or CURSOR DOWN
button to select the sound adjustment you want to
change: Treble, Bass, Balance, AVL, Dynamic
Bass, Incr. Surround, Stereo, SAP, Audio Out, and
Speaker. NOTE: The menu will show only five
items at a time, so you will need to continue scroll-
ing with the CURSOR DOWN button to adjust the
Incr. Surround, Stereo, SAP, Audio Out, or Speaker.
5
Press the CURSOR LEFT or CURSOR RIGHT
button to adjust the selected control. Or, if Incr.
Surround is chosen, press the CURSOR UP or
CURSOR DOWN to select the preferred mode. If
AVL, Stereo, SAP, Audio Out, or Speaker is select-
ed press the CURSOR RIGHT button repeatedly to
toggle the various modes.
6
Press the STATUS/EXIT button when finished to
remove the menu from the screen.