• Time download
Set the time of the clock display
automatically via Teletext. The clock will be
automatically synchronised to the correct
time.
Download Program •
Select the time from the teletext
transmission of a channel. Make this
download program the same as the startup
channel.
• Time offset
Set the time difference between the time
received from Teletext to the current time
at your location.
• Buzzer volume
Set the volume of the alarm buzzer.
Press 7. ï to select Store - go right and
press Æ to save setting.
Set 7�12 auto scart
Set the TV to switch to the source where scart
signal is detected.
Enter 1. Setup menu.
Press 2. ï to select Auto scart.
Setup menu Auto scart
Maximum volume 100
Switch on channel
Power on
Low power standby
Clock
Auto scart
USB break-in
Monitor out
AV1
Power ON SCART
Off
Press 3. Æ to enter Auto scart.
Press 4. Î or ï to select the desired option.
AV1 •
Select to switch TV automatically to AV1
when scart cable is connected to the AV1
connector.
Power ON SCART •
Select to switch the TV on from standby
mode when a scart signal is detected or
when no scart signal is detected the TV will
go to standby mode.
Off •
Switch off this feature.
Press 5. ï to select Store - go right and
press Æ to save setting.
Set USB break-in7�13
Set the TV to automatically detect USB devices.
Enter 1. Setup menu.
Press 2. ï to select USB break-in.
Setup menu USB break-in
Switch on channel
Power on
Low power standby
Clock
Auto scart
USB break-in
Monitor out
Blank current Channel
On
Off
Press 3. Æ to enter USB break-in.
Press 4. Î or ï to select the desired option.
On •
Enable plug and play auto detection of USB
devices.
Off •
Disable plug and play auto detection of USB
devices.
Press 5. ï to select Store - go right and
press Æ to save setting.
Select monitor out7�14
Select to output audio and video from TV via
relevant AV connectors.
Enter 1. Setup menu.
Press 2. ï to select Monitor out.
