Philips 32PFL3404D/12 TV Antenna User Manual


 
8
Note
If you cannot locate your remote control and
want to switch on the TV from standby, press
P/CH +/- or SOURCE at the side of the TV.
Switch channels
Press P +/- on the remote control or
P/CH +/- on the side of the TV.
Enter a channel number using the
Numeric buttons.
Use the channel grid.
Note
When you use a favourite list, you can only
select those channels in the list.
4 Use your
product
This section helps you perform basic operations
(see ‘Use more of your product’ on page 10).
Switch your TV on/off or to
standby
To switch on
If the standby indicator is off, press
POWER at the side of the TV.
If the standby indicator is red, press
(Standby-On) on the remote control.
To switch to standby
Press
(Standby-On) on the remote
control.
The standby indicator switches to red. »
To switch off
Press
POWER at the side of the TV.
The standby indicator switches off. »
Tip
Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
EN
Downloaded From TV-Manual.com Manuals