REMOTE
USE - CODE E
NTRY FOR ACCESSORIES
32
I
f your remote control will not operate your acces-
sory devices, look up the four-digit code listed by
your brand on panels 27-29.
Please read through steps 1-5 before beginning.
1
Place the TV/VCR/ACC Mode Switch in
the proper position.
2
Press the VCR • RECORD button on the
remote control and release.
3
Press the AUTO SOUND button on the
remote within 30 seconds, then release.
4
Enter the FOUR-DIGIT REMOTE
CODE NUMBER for your desired device.
The remote is now ready to send commands
to the unit.
5
Point the remote at the Device. Press the
POWER button on the remote to turn the unit
ON.
If this doesn’t work the first time, repeat the steps
using another remote code number.
VCR
Cable Box
DBS or other Accessory Device
REMOTE
USE
- SEARCH METHOD FOR ACCESSORIES
T
he Search Method of programming your remote
can take as long as 12 minutes to perform so we
recommend you use it as a last resort.
Please read all the steps below before beginning.
1
Press the POWER button on the device
your are attempting to program to turn it ON.
2
If programming a VCR or DVD type product
that has a STOP play command, place a VCR
Tape or DVD disc into the device. Press the
PLAY button.
3
Place the TV/VCR/ACC Mode Switch in
the proper position. VCR for programming
Video Cassette Recorders or ACC for all other
accessory devices.
4
Press the VCR • RECORD and the AUTO
SOUND buttons simultaneously and hold
them down.
As you continue to hold down buttons, the
remote will run through its programmed code
list with a command for the VCR or DVD to
STOP play. Or, for Cable Boxes and Satellite
Receivers the command will be to CHANGE
CHANNELS.
5
When the STOP command happens release
the two buttons.
Or for Cable Boxes and Satellite Receivers, as
soon as the channel changes ONCE
, IMME-
DIATELY release the two buttons.
