![](http://pdfasset.owneriq.net/0/98/098b43a6-9d52-4845-b016-56b10f919fdf/098b43a6-9d52-4845-b016-56b10f919fdf-bg27.png)
EN 39
English
Dig. camcorder
The most practical connection for a camcorder is at the side of the TV.
If you cannot use the side connector, use an HDMI or the EXT2 (YPbPr and Audio L/R) cable to
connect the camcorder to the back of the TV. (On certain models, EXT2 is labelled EXT3).
Channel decoder
NonPublish
Before using a SCART digital channel
decoder, select the channel to decode and
assign the decoder to the SCART connector.
1. Press .
2. Select [Setup] > [Channel settings] >
[Decoder] > [Channel].
3. Set the channel you want to decode.
4. Select [Status], then the location of the
decoder.
5. Press OK.
Downloaded From TV-Manual.com Manuals