Display User Manual
3D Solutions
23 September 2008
©2008 Philips Electronics Nederland B.V. 15 of 26
3.7 Cleaning instructions
Before cleaning the display, disconnect the power cord and DVI cable.
It is preferable to clean the front of the display with the cleaning products listed in the table below.
To clean we recommend:
cleaning materials e.g. soft cotton cloth
window leather
Aqueous solution, neutral and weakly
alkaline window cleaner without
additives of abrasive substances:
Permitted portion of ammonia < 5
Vol-%, as well as water soluble
organic solvents < 5 Vol-%.
e.g. Flux
Ajax
Do not use for cleaning:
alkaline lyes e.g. durd soap, certain textile detergents
lyes e.g. toilet cleaner
acids e.g. hydrochloric acid, vinegar, lemon
decalcification agent e.g. citric acid
degreasing agent e.g. acetone, methylene chloride,
trichloroethylene, petrol
Strong ammonia detergents e.g. Toilet cleaner
chlorine or Hypochloride detergents e.g. Chavel water, Domestos
solvents e.g. Ethyl alcohol, Isopropyl alcohol,
alcohol, acetone, trichloroethylene,
benzene, hexane, petrol
coarse millinery e.g. abrasive, steel wool, sponge with
abrasives, blades cloth with thread
made of steel, hard cloth or paper
tissue
Other Electrolube ASC, REF ASC250ml
As an alternative, clean the front of the display with a solution of soft soap (e.g. liquid hand soap) and
tepid water, using a soft cloth or sponge.
The rest of the display can be cleaned with a dry cloth.