Filter
Top Products
4
4 Press 0-9 (Numeric buttons) to enter the physical channel
number.
5 Press to set the MPEG PROGRAM NUMBER to a particular
program in the physical channel.
6 Press 0-9 (Numeric buttons) to enter the program number.
Note
• You can also select DIGITAL CH SCROLL and press to select the
digital channel numbers.
Select a ring
1 Press M on the setup remote control to display the setup menu.
2 Select the channel that you want to save in a ring and the input
source (see ‘Manual installation of analog channels’ on page 4).
3 Press to select CHANNEL INSTALL > RINGS.
4 Press to select a ring number.
» A ashing red dash appears next to the selected ring.
5 Press to save or remove a channel from the ring.
» The ring is marked by an ‘X’ when the channel is saved in it.
6 Press to select a category option (HIGH DEFINITION,
SPORTS, NEWS, etc) to save the channel.
7 Press to select YES to save the channel to this category or
NO to remove the channel.
CHANNEL TV 2
INPUT TUNER
LABEL
( )
>
MUTE
NONE
CHANNEL INSTALL
DIGITAL CH SCROLL
CHANNEL LOGO
>
RF CHANNEL NUMBER
MPEG PROGRAM NUMBER
>
2
8
DIGITAL
YES
RINGS
>
HIGH DEFINITION
RINGS
SPORTS
NEWS
YES
KIDS
YES
MOVIES
YES
NETWORK
YES
ADULT
YES
LIFESTYLE
YES
OTHERS
NO
NO
YES
CHANNEL RINGS
(1X)(2 )(3 )(4 )
4 Change the channel
settings
This section describes how to change the channel settings.
Manual installation of analog channels
1 Press M on the setup remote control to display the setup menu.
2 Press to select CHANNEL INSTALL > CHANNEL.
3 Press 0-9 (Numeric buttons) to select a channel.
• For cable mode, select a number between 01 - 250.
• For antenna mode, select a number between 02 - 250.
4 Press to select INPUT, and then press to select the source
of input.
Manual installation of digital channels
1 Press M on the setup remote control to display the setup menu.
2 Press to select CHANNEL INSTALL > DIGITAL > YES.
3 Press to set the RF CHANNEL NUMBER to the physical
channel number.
INPUT TUNER
DIGITAL
NO
RINGS
LABEL
( )
>
>
MUTE NONE
CHANNEL INSTALL
RF CHANNEL NUMBER
2
MPEG PROGRAM NUMBER
8
CHANNEL LOGO
>
CHANNEL
TV 2
CHANNEL TV 2
INPUT TUNER
RINGS
LABEL
( )
>
>
MUTE
NONE
CHANNEL INSTALL
DIGITAL CH SCROLL
CHANNEL LOGO
>
RF CHANNEL NUMBER
MPEG PROGRAM NUMBER
>
2
8
DIGITAL
YES
EN