Filter
Top Products
72
TROUBLE SHOOTING TIPS
NNoo PPoowweerr
NNoo PPiiccttuurree
NNoo SSoouunndd
NNoo AAVV SSiiggnnaall
SS--VVHHSS CCoolloorr BBeeccoommeess FFaaiinntt
TTVV OOnnllyy PPrroodduucceess MMOONNOO
SSoouunndd
• Check the TV power cord. Unplug the TV, wait 10 seconds,
then reinsert the plug into the outlet and push the POWER
button again.
• Check that the outlet is not on a wall switch.
• Be sure the fuse is not blown on the AC power strip, if one
is being used.
• Check antenna/cable connections. Are they properly secured
to the TV’s ANT75Ω plug?
• Try running the Auto Program feature to find all available
channels.
• Press the AV button on the remote to make sure the correct
signal source is selected.
• If using an accessory device, be sure that it i functioning properly.
• If in PC Mode, a video signal MUST BE present or the TV will
turn off.
• Check the VOLUME buttons.
• Check the MUTE button on the remote control.
• If you’re attempting to hook up auxiliary equipment, check
the audio jack connections.
• Check whether AV and S-Video sockets connected simulta-
neously. If they are, disconnect the S-Video socket. AV signal
automatically overrides the S-Video signal if both sockets are
connected simultaneously.
• Unplug socket for S-Video connection. Reconnect the S-
Video socket of the TV carefully to the VCR socket.
• If using a cable box with RF only type connections, the signal
coming from the cable box will be produced in MONO only.
• Check Sound control setting. Change setting to Stereo.
065001056930 42 PLASMA CTV100 14/7/06 8:11 Page 72