Philips 42PFL3604H/12 TV Antenna User Manual


 
18
3 Enter the three-digit page number of the
subtitle page with the Numeric buttons.
4 Press MHEG/TELETEXT to switch off
teletext.
5 Press SUBTITLE.
The » [Subtitle mode] menu appears.
6 Select [On] to display subtitles always or
[On during mute] to display subtitles only
when audio is muted.
7 Press OK to enable subtitles.
Note
Repeat this procedure to enable subtitles on
each analogue channel.
Tip
Select [Subtitle mode] > [Off] to disable
subtitles.
Enable subtitles on digital TV channels
1 When watching digital channels, press
SUBTITLE.
The » [Subtitle mode] menu appears.
2 Select [On] to display subtitles always or
[On during mute] to display subtitles only
when audio is muted.
3 Press OK to enable subtitles.
Select a subtitle language on digital TV
channels
Note
When you select a subtitle language on
a digital TV channel as described below,
the preferred subtitle language set in the
installation menu is temporarily overruled.
1 Press MENU.
2 Press to select [Setup] >
[Features] > [Subtitle language].
5 Enter your code and press OK.
6 Repeat the process to unlock more
channels.
Note
Restart the TV for the change to take effect.
If you use P +/- on your remote control to
switch between channels, the locked channels
are skipped.
If you access the locked channels from the
channel grid, a screen prompting you to enter
your current code appears.
Set parental ratings
Some digital broadcasters rate their
programmes according to age. You can set
your TV to display only programmes with age
ratings higher than your child’s age.
1 Press MENU.
2 Press to select [Setup] >
[Features] > [Parental rating].
A code setup screen appears. »
3 Enter your code using Numeric buttons.
The parental rating menu appears. »
4 Press to select an age rating.
5 Press OK to confirm.
6 Press MENU to exit.
Use subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via teletext or DVB-
T digital broadcasts. With digital broadcasts,
you have the additional option of selecting a
preferred subtitle language.
Enable subtitles on analogue TV
channels
1 Select an analogue TV channel.
2 Press MHEG/TELETEXT.
EN
Downloaded From TV-Manual.com Manuals