Filter
Top Products
Program Number
Display the program/Channel number of the current channel
Skip
Make this switch On to skip the selected channel,
Program Name
To give the channel name press Ok on this option and use
Up/Down key to select letters and Left/Right key to navigate
Color System
Change the color system(AUTO/PAL/SECAM) setting if
picture is not reproduced properly
SETUP
the skipped channel can be viewed by entering channel number
Sound System
Change the sound system (BG/I/DK) setting if sound is not
Note : For INDIA Sound system is BG
Auto Search
Selec this function, TV set will start auto tuning, for all
available channels
Manual Search
Select this function for Manual Searching the channels, select PR start-on
which user want manual search Start from-the frequency from which
Update Search
Use this function to update the new frequencies in transmition
Note : For INDIA Color system is AUTO or PAL
reproduced properly
the tunning will start start search-press Ok to start manual tunning
or deleted channels and appends last to the current list of
channels without disturbing them.
Fine Tunning
Select this option for Fine tunning the channel at which either
Picture or Sound is not clear even after Auto Searching.
Program Edit
User can edit the programs by Swap, Insert, Copy, Delete operation
1.To swap, Navigate to a channel to be swapped (selection bar
appears on it) press 1, navigate to another channel press OK,
these two channels are swapped
2.To insert, Navigate to a channel press 2, navigate where the channel
has to be inserted inserted herepress OK the selected channel will be
3.To copy, Navigate to a channel press 3, navigate where the channel
to be copied press OK the selected channel will be copied here
4.To delete, Navigate to a channel to delete, press 4, the channel will be deleted.
Contrast
Adjust these settings for fine adjustments of the Contrast
(0-100), Brightness(0-100) of pc picture on TV screen
Auto Setting
Auto setting allows the PC screen of TV to self adjust. This
automatically sets the H-position ,V- position, Phase and clock
Phase
Adjust the phase(0-31) and clock(0-255) to remove or reduce
picture noise.if noise appears adjust frequency by clock for
H Position
If picture is not Ok with auto setting then adjust Horrizontal
position(0-255) / Vertical position (0-63) manually to adjust
Brightness
Manual Clock
fine adjustments
V Position
the desired picture settings
Note : 1) The Geometric menu will be enable for VGA/PC source only. SETUP, VIDEO menu is disable
2) menu is disabled when PIP/POP is ON.SETUP
for VGA source.
3) menu is disabled when parental switch is ON, simillarly when hotel mode switch and disableSETUP
search is ON user can not enter SETUP menu.
GEOMETRIC
EN 15
10
Setup Menu
11
Geometric Menu