Philips 42PFL5203 CRT Television User Manual


 
EN-19
EN
mode) or Mono or Spatial (when in
mono mode).
BBE• (High definition sound)
An enhancement technology licensed
by BBE Sound. Restores clarity and
presence for better speech intelligibility
and musical realism.
Adjust Ambilight settings5�4
This feature is not available on all models.
1. Press on the remote control and select
Ambilight.
Press 2. Æ to enter the list.
Main
Picture Setting
Advanced Picture
Sound
Ambilight
Features
Install
Location
Ambilight
Brightness
Mode
Colour
Custom colour
Balance
Press 3. Î or ï to select one of the following
settings:
Ambilight•
Switches Ambilight on or off.
• Brightness
Changes the light output of Ambilight.
• Mode
Chooses from four Ambilight modes:
Colour, Relaxed, Moderate, and Dynamic.
• Colour
Selects a pre-defined colour setting
(Warm white, Cool white, Blue, Red,
Green, Yellow, Magenta, or make a
custom colour of your own.
Note D
This option appears only after you select
Mode >Colour above.
Custom Colour •
Sets the colour saturation or palette.
Note D
This option appears only after you select
Colour > Custom above.
• Balance
Sets the level of Ambilight on the left
and right side of the TV.
Caution C
To avoid poor remote control reception, do
not place remote control sensors on your
devices in range of Ambilight.
Create a surf list5�5
You can store up to eight frequently watched
channels in a surf list.
Select a channel that you want to add to 1.
the surf list.
Press 2. on the remote control to
display the surf list.
Surf
003
Press 3. Æ to add the selected channel to the
surf list.
Repeat steps 1 to 3 to add more channels 4.
to the list.
Press 5. to exit.
To view the a channel from the surf list
Press 1. to display the surf list.
Press 2. Î or ï until you find the channel.
Downloaded From TV-Manual.com Manuals