Philips 42PFL5614/60 TV Antenna User Manual


 
22
2 Press to select [Setup] >
[Installation] > [Channel install.] >
[Analogue: Manual].
The » [Analogue: Manual] menu appears.
3 Press to select and enter [System].
4 Press to select your country or
region.
5 Press OK to confirm.
6 Press (Home) to exit.
Step 2 Search and store new TV
channels
1 Press (Home).
2 Press to select [Setup] >
[Installation] > [Channel install.] >
[Analogue: Manual].
The » [Analogue: Manual] menu appears.
3 Press to select and enter [Search].
4 Press or use Numeric buttons to
manually enter the three digit frequency.
5 Press OK to begin search.
If a channel is unavailable at the »
selected frequency, the system searches
for the next available channel.
6 Press BACK when the new channel is
found.
7 Press to select [Store new channel]
to store the new channel under a new
channel number.
8 Press to enter [Store new channel].
9 Press to select [Yes] and press OK to
store the new channel.
10 Press (Home) to exit.
Step 3 Fine-tune analogue channels
1 Press (Home).
2 Press to select [Setup] >
[Installation] > [Channel install.] >
[Analogue: Manual].
The » [Analogue: Manual] menu appears.
6 Press to select [Stop] or [Continue].
7 Press OK to confirm your choice.
8 When done, press (Home) to exit.
Manually install channels
This section describes how to search and store
analogue TV channels manually.
1 Press (Home).
2 Press to select [Setup] >
[Installation] > [Channel install.] >
[Analogue: Manual].
The » [Analogue: Manual] menu appears.
3 Press to select the item you want to
adjust.
[System]
[Search]
[Fine-tune]
[Store cur. chan.]
[Store new channel]
[Skip channel]
Step 1 Select your system
Note
Skip this step if your system settings are
correct.
1 Press (Home).
Picture
Sound
Features
Installation
Software update
Menu language
Channel install.
Preferences
Decoder
Factory setting
Current software
Channel assistant
Analogue: Manual
EN
Downloaded From TV-Manual.com Manuals