Philips 55PFL3907 CRT Television User Manual


  Open as PDF
of 54
 
24
Settingitems Description
SRS
TruSurroundHD
Off Sets SRS TruSurround HD™ to off.
On Selects available modes for surround sound.
AVL(Auto
VolumeLeveling)
Off Sets AVL to off.
On
Reduces sudden changes in volume, for example,
during commercials or when switching channels.
TVspeakers
Off
The sound will not be output from the unit's
speakers.
On
The sound will be output from the unit's
speakers.
Speakers
EasyLink
You can control audio output from your
connected EasyLink Compliant Devices with
VOL+/−by using this unit's remote control.
Deltavolume
If a channel
or input
device is:
Too
Loud
Navigate to that channel
or input device and
set a negative delta
volume level as per your
personal preferences.
TooSoft
Navigate to that channel
or input device and
set a positive delta
volume level as per your
personal preferences.
4 Press MENU to exit.
Note
•
[MasterEasyLink] must be activated in the [Preferences] menu to make the
[TVSpeakers] menu available when you select [On]or[SpeakersEasyLink].
Usingautomode
1 Press AUTOMODE to set your TV to a predened picture and
sound setting.
2 Use
Î
/
ï
to select one of the following settings :
• [Personal] : The customized settings you dened by using
the [Picture] menu.
• [Sports] : Vivid picture settings and clear sound for high action.
• [Standard] : For normal TV viewing.
• [Movie] : Brilliant picture settings for a cinematic experience.
• [Game] : Optimized for PCs, games consoles and playstations.
• [InternetVideo] : Optimized for low bitrate internet video.
• [PowerSaver] : Eco TV settings for lower power consumption.
Createanduselistsoffavoritechannels
You can create lists of your preferred TV channels so that you can nd
those channels easily.
Selectalistoffavoritechannels
1 Press FAV on the remote control.
» Your lists of favorite channels are displayed.
2 Use
Î
/
ï 
to highlight a list, and then press OK to select the list.
UsingyourTVasaPCmonitor
Use a VGA connector to connect a PC to your TV. For sound, add an
audio cable with a stereo mini jack.
Caution
•
Before you connect your PC, set the PC monitor refresh rate to 60Hz.
Supportedscreenresolutions
The following screen resolutions are supported in PC mode :
Resolution Refresh rate
640×480 60Hz
800×600 60Hz
1024×768 60Hz
1280×768 60Hz
1360×768 60Hz
1440×900 60Hz
1280×1024 60Hz
1400×1050 60Hz
1680×1050 60Hz
1920×1080 60Hz
Changingsoundsettings
1 Press MENU on the remote control and then use
Î
/
ï
/
Í
/
Æ
to
select [Setup] > [Sound].
Picture
Sound
Features
Installation
Software
Equalizer Start now
Balance
SRS TruSurround HD Off
AVL Off
TV speakers On
Delta volume
2 Use
Î
/
ï
/
Í
/
Æ
 to highlight a sound setting and then press OK to
select the setting.
3 Adjust the following items.
The following sound settings can be congured. Depending on the
sound source, some sound settings are not available.
Settingitems Description
Equalizer Adjust tone quality for each frequency.
Balance
Adjusts the balance of the right and left
speakers to best suit your listening position.
Digitalaudiolanguage
Available for digital channels only, when
multiple languages are broadcast. Lists available
audio languages.
Alternateaudio
Main
Available for analog channels only when a main
and second audio program (SAP) is broadcast.
Select the main audio program.
SAP
Available for analog channels only when a main
and second audio program (SAP) is broadcast.
Select the second audio program.
Mono/Stereo
Mono Outputs mono-audio.
Stereo Outputs stereo-audio.
EN
 previous next