Filter
Top Products
35EN
English
Connecting a set-top box via a composite connector and
analog audio
RF IN
AUDIO L/R + VIDEO
AUDIO L/R + VIDEO
OUT
IN
IN
IN
AUDIO L/R + VIDEO
CABLE
CABLE
Set-top box
Set-top box
Note
• Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
• When you connect cables, match the cable colors to the connectors on the TV.
Connecting the TV to the internet using an Ethernet cable
LAN
LAN WAN
54321
Hub or
broadband router
Telecommunications
equipment (modem, etc.)
Ethernet cable
Ethernet cable
Ethernet cable
Ethernet cable
Internet
Internet
Note
• Please purchase shielded Ethernet cables at your local store and use them when you
connect to network equipment.
• After connecting a Ethernet cable, set up necessary network settings.(For the network
setup, refer to ‘Network’ on page 26)
• Do not insert any cable other than a Ethernet cable to the LAN terminal to avoid
damaging the unit.
• If your telecommunications equipment (modem, etc.) does not have broadband router
functions, connect a broadband router.
• If your telecommunications equipment (modem, etc.) has broadband router functions
but there is no vacant port, use a hub.
• For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.
• Do not connect your PC directly to the LAN terminal of this unit.
Connecting a digital home theater amplifi er using a digital
audio coaxial cable
DIGITAL AUDIO
IN
OUT
OUT
OUT
digital home theater amplifier
digital home theater amplifier
Note
• Due to Copyright restrictions, the broadcaster may choose to mute PCM audio over
Digital Audio Output for certain channels, shows or segments during the broadcast.