Filter
Top Products
10
Switch on for the first time
* The first time the TV set is switched on, a
congratulation message will appear on screen.
The language of which changes every 5 seconds.
If the message is not displayed, press and hold
down the
MENU key on the side of the TV set
for 5 seconds to display the message.
* Only available on certain versions.
& Press the key on the remote control, the
moment your prefered language is visible
on the screen.The Setup menu is displayed :
English
Español
Français
Italiano
Suomi
Language
Country
Time Z
one
Service Scan
Setup
11:46
Select your preferred language
é With the cursor keys, select Language,
Country or Time Zone and check if the
adjustment is according to your preferences.
If necessary, use the cursor keys to make
your adjustment and press
key to exit.
CAUTION : if you select a wrong country, the
channel numbering will not be according to the
standard for your country and you may not
receive all services or nothing at all. Note that the
Language can be selected
independently from the
Country.
“ Select Service Scan from the menu and
press
key to start the installation. The
service scan menu is displayed. All the digital
and analogue programmes are searched for
and stored automatically. When the search is
complete, the menu will indicate the number
of digital services and analogue programmes
found.
‘ Press the key twice to start watching TV.
The television then displays the current
program. The installation is now complete.
NOTE : If at some point of time you decide
to reset to the factory default settings, press
and hold down the
MENU key on the side
of the TV set for 5 seconds. A congratulation
message will appear on screen. Repeat steps
1 - 5 as if this was the first time you have
turned on the TV.
This activity will reset both
the Digital and
Analogue mode to
factory default settings.