Filter
Top Products
User Manual BDL4681XU
RETURN TO THE CONTENTS
4.2.5. CONFIGURATION 1 MENU
CONFIGURATION 1
AUTO ADJUST
POWER SAVE
LANGUAGE
PANEL SAVING
COLOR SYSTEM
CONFIGURATION RESET
FACTORY RESET
Sel Adjust Enter Back Quit
AUTO
ENGLISH
AUTO ADJUST
Note: For the VGA input only.
Use this function to let the monitor automatically optimize the display of VGA input image.
Press the SET button to adjust.
POWER SAVE
Set the monitor to reduce the power automatically.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle
between
• RGB - Select ON to let the monitor enter DPMS mode when no signal can be detected from the HDMI,
DVI-D, and VGA inputs three times in a row. Use the PLUS/MINUS button to make selection.
• VIDEO - Select ON to let the monitor enter power saving mode when no signal is detected from the
VIDEO, S-VIDEO, and COMPONENT inputs three times in a row. Use the PLUS/MINUS button to
make selection.
LANGUAGE
Select the language for the OSD menu.
Use the PLUS/MINUS button to select a language.
PANEL SAVING
Choose to enable the panel saving functions to reduce the risk of the "image persistence”. Press the SET/
PLUS button to open the submenu, and then press the UP/DOWN button to toggle between
• COOLING FAN - Set the working pattern of the monitor’s internal cooling fan. Select AUTO and the
cooling fan will only be activated when the monitor reaches a certain temperature. Select ON and the
cooling fan will work constantly when the monitor power is on. Use the PLUS/MINUS button to make
selection.
• BRIGHTNESS - Select ON and the brightness of the image will be reduced to an appropriate level, and
the BRIGHTNESS setting in the PICTURE menu will become unavailable. Use the PLUS/MINUS
button to make selection.
• PIXEL SHIFT - Select the time interval for the monitor to slightly expand the image size and shift the
position of pixels in four directions (up, down, left, and right). Use the PLUS/MINUS button to make
selection (OFF-900 seconds from current time).
COLOR SYSTEM
Select the color system depending on the input video format.
Use the PLUS/MINUS button to toggle between
• AUTO • PAL 4.43
• PAL 3.58 • SECAM
• NTSC 4.43 • NTSC 3.58
Downloaded From TV-Manual.com Manuals