Philips BDP2985 Blu-ray Player User Manual


 
20 EN
3 Connect the USB storage device to the
(USB) connector on this player.
4 Press , and select [Setup].
5 Select [Advanced] > [Software update]>
[USB].
» If an upgrade media is detected, you
are prompted to start the update.
6 Follow the instructions on the TV screen
to update the software.
» When the update is complete, this
player automatically turns off and on
again.
Caution
Do not turn off the power or remove the USB storage
device when the software update is in progress because
you might damage this player.
6 Specifications
Note
Specications are subject to change without notice
Region code
This player can play discs with the following
region codes.
DVD Blu-ray Countries
USA and
Canada
Playable media
BD-Video, BD 3D
DVD-Video, DVD+R/+RW, DVD-R/-RW,
DVD+R/-R DL (Dual Layer)
VCD/SVCD
Audio CD, CD-R/CD-RW, MP3 media,
WMA media, JPEG les
DivX (Ultra)/DivX Plus HD media, MKV
media
USB storage device
File format
Video: .avi, .divx, .mp4, .mkv
Audio: .mp3, .wma, .wav
Picture: .jpg, .gif, .png
Video
Signal system: PAL / NTSC
HDMI output: 480i/576i, 480p/576p, 720p,
1080i, 1080p, 1080p/24Hz
Audio
HDMI output
Digital output: 0.5 Vp-p (75 ohm)
Coaxial
Sampling frequency:
MP3: 32 kHz, 44.1 kHz, 48 kHz
WMA: 44.1 kHz, 48 kHz
Constant bit rate:
MP3: 112 kbps - 320 kpbs
WMA: 48 kpbs - 192 kpbs
A