Philips BDP3380 Blu-ray Player User Manual


 
17EN
3 Change settings
This section helps you change the settins of this
player.
Note
You cannot change a menu option that is grayed out.
To return to the previous menu, press . To exit the
menu, press
.
Picture
1
Press .
2 Select [Setup] > [Video] to access the
video setup options.
 [TV display]: Select a picture display format

 [HDMI video]: Select an HDMI video
resolution.
 [HDMI Deep Color]: Display colors with
more shades and hues when the video
content is recorded in Deep Color and the
TV supports this feature.
 [Picture settings]
color setting.
1
2
3
Watch 3D video
 [Watch 3D video]: Set to 3D or 2D
output when playing a Blu-ray 3D disc.
The player must be connected to a 3D TV
through HDMI.
Note
If you change a setting, make sure that the TV supports
the new setting.
For settings related to HDMI, the TV must be
connected through HDMI.
For the composite connection (via the VIDEO
connector), select a video resolution of 480i/576i
or 480p/576p under [HDMI video] to enable video
output.
Sound
1
Press .
2 Select [Setup] > [Audio] to access the
audio setup options.
 [Night mode]: Select quiet or full dynamic
sound. Night mode decreases the volume
of loud sound and increases the volume of
soft sound (such as speech).
 [Neo 6]: Enable or disable a surround
sound effect which is converted from 2.0
channel audio.
 [HDMI Audio]: Set an HDMI audio format
when this player is connected through
HDMI.
 [Digital Audio]: Select an audio format
for the sound output when this player is
connected through a digital connector
(coaxial).
 [PCM Downsampling]: Set the sampling
rate for PCM audio output when this
player is connected through a digital
connector (coaxial).
Note
For settings related to HDMI, the TV must be
connected through HDMI.
Night mode is only available for Dolby encoded DVD
and Blu-ray discs.