Philips BDP3390 Blu-ray Player User Manual


 
20 EN
3 Connect the USB storage device to the
(USB) connector on this player.
4 Press , and select [Setup].
5 Select [Advanced] > [Software update]>
[USB].
» If an upgrade media is detected, you
are prompted to start the update.
6 Follow the instructions on the TV screen
to update the software.
» When the update is complete, this
player automatically turns off and on
again.
Caution
Do not turn off the power or remove the USB storage
device when the software update is in progress because
you might damage this player.
5 Specifications
Note

Region code
This player can play discs with the following
region codes.
DVD Blu-ray Countries
Europe, United
Kingdom
Playable media
 BD-Video, BD 3D
 DVD-Video, DVD+R/+RW, DVD-R/-RW,
DVD+R/-R DL (Dual Layer)
 VCD/SVCD
 Audio CD, CD-R/CD-RW, MP3 media,

 DivX (Ultra)/DivX Plus HD media, MKV
media
 USB storage device
File format
 Video: .avi, .divx, .mp4, .mkv
 Audio: .mp3, .wma, .wav
 
Video
 Signal system: PAL / NTSC
 Composite video output: 1 Vp-p (75 ohm)
 HDMI output: 480i/576i, 480p/576p, 720p,
1080i, 1080p, 1080p/24Hz
Audio
 2 Channel analog output
 Audio Front L&R : 2 Vrms (> 1 kohm)
 Digital output: 0.5 Vp-p (75 ohm)
 Coaxial
 HDMI output
 Sampling frequency:
 MP3: 32 kHz, 44.1 kHz, 48 kHz
 WMA: 44.1 kHz, 48 kHz
B