Filter
Top Products
Using the Remote Control
®
®
®
®
Standby–On
Press to turn the TV on or off.
NOTE: The TV is never powered off completely unless
it is physically unplugged from the power source.
Surround Sound
Press to display a list of available sound modes. Choose
from Incredible Surround™ and Dolby* Virtual settings.
(See page 41 in the Directions for Use manual.)
VCR/DVD Functions
When the remote is in the VCR mode, these buttons will
allow you start a recording (●), rewind a tape (ᮤᮤ),
stop the playback of a tape (■), play a videotape (ᮣ), or
fast-forward a videotape (ᮣᮣ).
Time Display
Press to display the current time on the TV screen.
CC (Closed Captioning)
Press to turn Closed Captioning off, on, or on during
mute. (See page 47 in the Directions for Use manual.)
Cursor Up, Down, Right, Left
Use to navigate the on-screen menu and make control
adjustments or settings.
Additionally, use these buttons to pan the screen up or
down to show any excluded parts of the picture. Left or
right panning is possible with the Side input source when
“Game” is selected as the type of source for the Side
input. (See page 18 in the Directions for Use manual.)
Also use with the Dual Screen/PIP feature to select a
screen or reposition a PIP screen. (See page 58 in the
Directions for Use manual.)
Menu On/Off
Press to display the TV’s on-screen menu or to turn it off.
CH (Channel Selection)
Press to browse through the TV channels.
Digit (Number Buttons)
Press to directly access a specific TV channel. For a two-
or three-digit channel, enter all numbers. Press a single-
digit button and hold a bit longer to directly access a sin-
gle-digit channel. These buttons can also be used to enter
values in certain on-screen menu controls.
PᮤP (AutoSurf™)
If you set the Surf control in the TV’s on-screen menu to
two channels, this button will allow you to toggle between
the current channel and the last viewed channel. If you
choose the nine-channel Surf, pressing this button allows
you to add and scroll up to nine of your favorite channels.
See page 57 in the Directions for Use manual.
Active Control™ Plus
NOTE: Active Control™ Plus is not available for use
with the AV3, AV4, AV5, and AV6 input sources.
Press to toggle the options Off, Minimum, Medium, and
Maximum. Maximum is the recommended option. See
page 28 in the Directions for Use manual.
Picture Format
Press to display a list of available picture formats for
showing video images in the traditional 4:3 proportions.
Press this button repeatedly to select a picture format.
Choose from Automatic, Super zoom, Panoramic, 4:3,
Movie expand 14:9, Movie expand 16:9, 16:9 subtitle,
and Wide screen. See pages 35–36 in the Directions for
Use manual.
NOTES:
• With AV3–AV6 connections, the Automatic picture
format option is not available.
• In Dual Screen mode, press the Picture Format button
to switch between a full or 4:3 letterbox picture format.
Select (CBL VCR DVD SAT AMP) and Backlight
Press this button to cycle across the accessory mode dial.
Stop pressing when the mode you desire is lighted. The
light will stay on for 2 seconds and then begin blinking to
indicate the remote is in your desired mode. Once the
mode is selected, you must press a button within 60 sec-
onds for the remote to remain in the selected mode or it
will default back to the TV mode. (See pages 26-27 in
the Directions for Use manual.) Pressing and holding the
Select button for 2 seconds backlights the remote control
buttons. The buttons remain lighted for 5 seconds after
you press Select.
Source
Press to display a list of source options—TV, AV1, AV2,
AV3, AV4, AV5, AV6, or Side. Use the Cursor Up/Down
buttons to select the next item, then press the OK button
to confirm or press the Source Select button to select the
next item in the list.
Alternate Audio (SAP)
When you tune to a channel where SAP (Second Audio
Program) is available, you can toggle between Main and
SAP. If SAP is not available, only Main can be selected.
(See page 42 in the Directions for Use manual.)
PixelPlus™ Demo
Press to activate the demo, which illustrates the benefits
of Pixel Plus™. Press again to turn the demo off. Press
and the TV screen will be divided in half displaying the
Pixel Plus™ Demo. The left side will show the picture
with Pixel Plus™ switched off. The right side of the
screen will show the picture with Pixel Plus™ switched
on. (See page 30 in the Directions for Use manual.)
OK
Press to activate or confirm menu choices.
Freeze Format
Pressing will apply one of the Freeze modes you set
using the on-screen menu. See page 60 in the Directions
for Use manual.
Freeze mode stops action in the main screen. Sound
will continue to be heard. Press again to resume nor-
mal viewing.
Replay mode displays a few seconds of stored video
in the PIP window.
Photo Finish mode displays six stored frames from
the picture.
NOTE: Continuing to hold the Freeze Format button
down will cycle the TV through the Freeze modes:
Freeze, Replay, and Photo Finish.
VOL (Volume)
Press + or – to adjust the volume.
Mute
Press to interrupt or restore sound.
Information Plus+
Press to show information (when available) about the
current channel, program, source, number or name, local
time, CC availability, SAP availability, program ratings,
display format, sound mode, and remaining length of a
Sleeptimer setting.
Dual Screen/PIP (Picture-in-Picture)
Press to turn the PIP dual screen on or off. Continuing to
hold the Dual Screen/PIP button down will cycle through
the Dual Screen/PIP options. (See page 58 in the
Directions for Use manual.)
To load the supplied batteries into the remote:
1
Remove the battery compartment door on the back of
the remote.
2
Place the batteries (2-AA) in the remote. Make sure the (+)
and (–) ends of the batteries line up correctly (the inside of
the case is marked).
3
Reattach the battery compartment door.
Be sure to point the remote at the Remote Sensor window on the
front of the television when using it to operate the television.
Installing the Batteries
3
2
1
Remote Control
(shown from the bottom)
Remote Control Buttons
Active Control, AutoSurf, Incredible Surround, and Pixel Plus are trademarks of Philips Consumer Electronics. Copyright 2003 Philips Consumer
Electronics. All rights reserved.
*Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
6
When the batteries in your remote
control run low, the remote control
will send a “Battery low” command
to the TV. The TV will then display
a message on the screen reminding
you to replace the batteries as soon
as possible.
H
ELPFUL HINT